// ==UserScript==
// @name WME Junction Angle Info
// @description Show the angle between two selected (and connected) segments
// @match https://beta.waze.com/*editor*
// @match https://www.waze.com/*editor*
// @exclude https://www.waze.com/*user/*editor/*
// @version 2.2.12
// @grant GM_addElement
// @namespace https://greasyfork.org/scripts/35547-wme-junction-angle-info/
// @require https://greasyfork.org/scripts/24851-wazewrap/code/WazeWrap.js
// @copyright 2018 seb-d59, 2016 Michael Wikberg <waze@wikberg.fi>
// @license CC-BY-NC-SA
// @icon data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAADAAAAAwCAIAAADYYG7QAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8YQUAAAAJcEhZcwAADsMAAA7DAcdvqGQAAA6pSURBVFhHrZkJcBNnlscbgjEZmHAYsHVZUrek7pbUuo9W674l65Z8WzbGxoAxhzNgcweMDeY0GLDHwYBhGCABTEwIOSaTZBIyye6mcjBJFTs7O5Xazc4ks7NbU7vJzjKVrc0+RVqwhWEC5NW/VFKr3//79fe+fv3JRrp2bjs00NfW3gqqSldojCqFVk4q8LK4z+a2kEosVRVIVnrL60KMU602SfnaohIaQR0zb/72428eNr7+n6/r14bBh2+ahaJCDMOcWk9ndOuFFdeQlrbF4USZ0aqlNDJKS8YrovXNNSa7PlEVSTdVK3REMGIDcbEiuU5c3hDhmgvA6PV3X8p5P2x89ecv6XIRWCX94bFVP//l+l9lhYikpTB8MOauW1y1pqN13ab26oZkrCLo9JuBZj77CYfH0LysJt1UXtdcqXALwOJHu5bkXB8tRl85C26Mj3xm5eU7QLWN5TB8RV0MXpPVYbVRNuOJqVoT5fAx9c1V3bs2Ny2pYSxqX9AWSvlYpqkc87RPP/tNzvKRo6Y9AEzratrvAD25rrW+sYKQCUQ4F17Ti8pXrlmytLUhFHVX1kTLIq7mltrautSuPTsa1qQgubEznjP7PuKtv3sVPGkPfgeomD1bSqHA1La6OVUZikFJYx54raiOdGxYtXvf9i1b1h3q37dpc6cmiELyqdHBnNn3Ef/+pz9aKgkeM/3UinM5oOp0tLy6rLYh7g9Z043Jhqby9nVLgePg4d4Nm9vXrV99fHhw6OmjiUSshJ4CQGCRM5ssvri+SVeIIPVjuY9jy4UzkUJO6MQn2QOTRNv2NNj2NvbmgKJJD3DU1MfWrm/t3Lh6X1/34NN9q59cfnxk8NrLzw2f/PGh/v1LW5pNNgOk6ROCnM0k8dX7R30LkMLCO0CvrZqr3Hnjq18fNBc2X/v2yCSx//h2cG6vbhtte2VjfBuycduT+/p3Dp8e6N6zdf/h3U+PDJw+f2LkpyeODPXv6O3auHlDV1fXzu5doZQf0sItTM7m7rh1Yw9DrXrx59tlDwY0cmkAnAk9B7oRiqJI74Fth4f2n3n2xPnRM8dODe7p6926Y/OmbRuf6t7avbtn995eiKOHjyRqM32sYpUnZ3PPGKtHJinZ0I1b2SN3xzMvjICzxFxSWV0bjsWRsRcvDB4/1LmlfV9/b++B7u7dXb37d/YdOTBw7GjXzq66dK1erwNwIcGBtNgya87mnjEB6LvET54bAmeucjZBEC6vC9nc1bH3UM/A8MHdfT19R/cOHDuyrfupqtoqlVoFHBKRJGKKd5XvOb70NKTRKSxnc894YKCDJ7vBOdrkunDtwtU3riKwaAaG+3fu69q0bX2yIiGn5MCBi/GkpbK36uArT/4yu/jf6vwQ0kDQ8nNOk8cDA0HfB9vOvauA5tyVc8ja9e2hSJCUksAhxWVVtvT+2oHX1v5tlmO8QiEaMs9dPZFzmjweDOjL//pPV1oJtn0ndw+eGjRbzQhwUISi3tl0uH74zY738yBA729+++aOK5/tOdbTnFnX7T2Lc2bfR7z2zovgaamWXn3jeZihTMmGGk9f7/wwD+Kd9Tfe33L91zsu/8ueoc/3Hfl0108+3vbK6JpRSObbZvzh3z7P+T1yZLti88aqLM2lly8heRwfbHnzH7ov/m7vIHD8dufZG0+9+u6GO7h18QTkb+lbk/N7tHjpzTHUOVMV4WzcvW7V2lXegBfH8QzQOxs++mjr67/peeb3e4+C4A18hIO3OUDnV17e33RgUbyGRU+BB/5HN9/LuT5swB7N36iDy0M1C3GSwHCCLUAFuBT5x56fAgRMCUwMTE8ex9m2i0srFslsJZA5XvLgwt//4bOc90NF9ubi0oWJdHm0psIdCetsdlSuQG52jX6w5S0o1ngO0KXVL3h9ptsEQh/X0JK2rml3djyFBTKPfUet/KEX08GRTO+Bzacn5YzVJi1+pycW8kQjGKVA3uqYsKKh3wwuGrHbjFCaTI51pn3thvTJD1de++a2lo3+SRwi4Ft1lPugO+tbf/nv7EJmmaaYI/pITSxYERLIMEIrswXdhEaNvNnxwdvrf/XGuvf608fSjkY5LseM8yEBZGpdsuTZz8ej3BYcl1dY4BzUOWvf8HYYJjfgfeNnb1+FeYUsLlMQaQgualvsjnkT9SkOzlsgLFZbdErGgOyp7q+y1WmU2mgi2rml05POLDSubVZ8/8U8iDy1Xf2aaVueRafKSqAK99raQnO/9NKZ5ApH9uRS80yRBtPaDI6wy+y32kN2voxfjBWjCpFISSKta1r7j/Vfee0KtAHoB5DAdxXl1eg+qh66np2qrNz1qjXdjT0DG2DaQLBy4ecOtK7cCcapXNUC2mVRM/qFghI+KXSF3dVNNeUNFaGKsMaiK8F4yPOv51rkU/0dkMNmpsEYeaP+VaUOXaWXNfJduVrfpSks3ePF0rlskUBEybUmo9FqVurVEjmB4pjD6zTQRpKSU1q1wmjIAV1+dVQRYkFyZNdI3mDfXVDE2mPvRnefUdR4wIplKOBQbLaUwxGjbFQkJGU8iZiHYXyxmI+hLB53IZsF0uoMBCljc3gcvkAEt312elZ2LQYLdX3Z8sv/kTfM3Qq54Pn5bbjG8r7KavHZT6VJIxhyKTZPTHAwCQDxxDhLiLH4fI5QCFilIhFKECSlWMAqQSViMSmFj6hUnpsh3DsX8mHm86wn19bME/0+QCCYaTBk62cKSbmAkPFxKRsVA5ZATEjkclKpxCkKXuUajRAXYyRezOPNYcGqkiK7+naFqjMzTCZ0rVf+nOc7ibI090bJquXiv4qCYhb9mEAuwaQqTKYQyZWYjIKiiCmlgCSKBfx5HHYRl0MZtNaAh3bDvYYvEPIRq91qDEoBCLpwnukk+m40WUEbA1sOVSLAKZRUimTq7GwJCClXLCoWCtgYypdKZhUXKRiDJeDBDeo5fC5SUZcUWed8p3o9CA0otvc82LJUs3kiOV8iZ6F4CSriiPFSguSTBF9GElqlykIrbUa1w6SwGnReq7s8ijQtTWMAZETqT97Ic5yoTxjhA9CAqgbeyABpZgJQKa4oFohLhBIA4pEkWyJaIOQtREtZhLBUKSYsaqlNixooFiVCevdu5zM/YDPToep5jo+o+pGPAahYOx1oUJmGK5bO4wkXCjGBQsGTk0UojyPFFHa9yscovbS9IiCiKVPEhfzi0knYA7BN09te+N88x0dU09lPMzNkmM6TyIq4wgUCEUdCsAlioRhlERimk5OMCjcrxWaFPmK3lfs1AbOrMoS8fPm0yPoEi57afP53eY6PqPTJjwCIrX9crFQLZVQJJhbIKKGKEmrkhEmp8tBqn5F0qCiv3lEdsKTcujKrMeRABgYPiMxzAKh2+L08R1Dr8Bl0NoII99RmPx4dQktmwsp+bKYYXXmjFQ6eHZPDkQKOYM0n4xNBlUczf2qZT01nYSKBVM4SSeajaClFqJwmfdBKubQyh1IT1Dtr/eZKNx2zE3al1KZB1q5dhluLSoxT4vsuTHS81di1am5B4WMFt4H+3iJGENaK8NM3wyEMQZyOU9/EI3PnN9xYduwgq6A5MiH9m1DPMADxdPPkBiOh0Qopiq+QkbTa4LeaonZj2GSvckZaYp76AO6m6JgVZssUcSJeH62ycuH5Z2ptGW+38toXIRdV2vo3XtttoH92awoRVkdq9KtUCkMKEv5n7wekb64BIKGGI1Yq5nE5M+bPWyDil+CCH/KL5ojnEzaSSTK2Spuz1oOaJZaU0xBikksqkeqacGW1FzJLnUXwdBzv+K2+vdtvlyxbwUxgVM8XmRNulyxbwf/X8ue+ZJsL4TrlBqXKbIQGKFZTKjutchgwPS5mcHPCEmj0+Ro8AKQJ6U1xizluT7VUIen6WCziKKUhedJH/XigWzUtTAGyoMQeLZqBPK4Zqhkbf+YEeTf1Zi7S+EOZnlKZtZiC0NpohVmjsGkNPhMdovUBnc6v1pVpPbVeX11A7zdawvZoXQKprCwL+s0aa+bPq7IU3XTunyZajwN69gy8ndeQ6Z+teztmIYX41lsTT84pfeIDUZkYtlZiIweVCwVSvsai5pOljrCjvLHcVmbBdZjWofQk7I6o1eDRWwIW2DqqGI2IIhCTSUnBwxjnsHXTgAm29BPdxwGNjeEFSKHxWNWpm+XLooVIoXT7+DPvSN9cDVaYZZ7aoqBoqcxA0G69vcwSSHltQbPZR8dqy6I1QbPPYHCqMQoVK0USSoKRYqFYhNC0QqFAlUrMaCdZpql3FW7CGmrq+VHJ7Mxtj8wQoouvN9057Y6yxWKbphl9SpgGkNpGGT3ayuYk7dU5IpZ4fdgeNpt8ekuQphiS1BJCmYCDctgCbikqzMyQTkeYzAq336RyZH5wsZjH/uoO/16CWx3S4cIIhqf3qKVGicpG6V1qg0drcGvcCQeQaRxKwJIzpEgt8KVcRqdBqiMFuICLlgpEGMJY1EaT3O7U+cosZqeWsOZ+pLo6t+cNdn/BHZrdb4BkLoGUxpUOhUDBk5pJ2qc3+PVMwFiq5MFxeK91qpxJR6gmoLDIlGYlAOEKHKdIQi5DnB6T1a5x+ehUTShS4QsmPQoPxmEy/9DQLIrH9+d1y0m04vm/hHeNZPfRHGaGyi8O1AXooJGJMKhWKLfL4b3ao4ZXX43PGDCo3Kr44liyJanzagkTTupxAFLTaqPVpDHoEaffbHVqHR6D0aq2+xlHwGrymmQWMZvOMIHU9WFYVS0X/5jHAWo+/1nZjh/f/hnEYx5Xe2Wxplh0ScyWsDqrXDKb1BA2OssdCo8yvCjkrw8kWxKhxWFr3GKvcNiTNpyWSA0EocEVeoWOMSi1GiReWRZJuGMpL+PQ+WMud8ihcxikeopDlPINJRxmenYwFjNNEpGr4NKXNYKoKoeoLPO/nNy3xqliMwvXYzILCSjQ9OQuiombKbcC2gzw0VET0AQXlbmq3fCtrdwOQJak1ZFyiFQoV8LhYlyUEKES8f8BmIA7Ka4NUW4AAAAASUVORK5CYII=
// ==/UserScript==
/**
* Copyright 2016 Michael Wikberg <waze@wikberg.fi>
* WME Junction Angle Info extension is licensed under a Creative Commons
* Attribution-NonCommercial-ShareAlike 3.0 Unported License.
*
* Contributions by:
* 2014 Paweł Pyrczak "tkr85" <support@pyrczak.pl>
* 2014 "AlanOfTheBerg" <alanoftheberg@gmail.com>
* 2014 "berestovskyy" <?>
* 2015 "FZ69617" <?>
* 2015 "wlodek76" <?>
* 2016 Sergey Kuznetsov "WazeRus" <sergey@izhevsk.pro> (Russian translation)
* 2016 "MajkiiTelini" <?> Czech translation
* 2016 "witoco" <?> (Latin-American Spanish translation)
* 2017 "seb-d59" (Check override instruction and French translation) <https://www.waze.com/forum/memberlist.php?mode=viewprofile&u=16863068>
* 2019 thank to Sapozhnik for the Ukrainian (український) translation
*/
/*jshint eqnull:true, nonew:true, nomen:true, curly:true, latedef:true, unused:strict, noarg:true, loopfunc:true */
/*jshint trailing:true, forin:true, noempty:true, maxparams:7, maxerr:100, eqeqeq:true, strict:true, undef:true */
/*jshint bitwise:true, newcap:true, immed:true, onevar:true, browser:true, nonbsp:true, freeze:true */
/*global I18n, $, W*/
function run_ja() {
"use strict";
/*
* First some variable and enumeration definitions
*/
var junctionangle_version = "2.2.12";
var junctionangle_debug = 0; //0: no output, 1: basic info, 2: debug 3: verbose debug, 4: insane debug
var ja_last_restart = 0, ja_roundabout_points = [], ja_options = {}, ja_mapLayer;
var TURN_ANGLE = 45.50; //Turn vs. keep angle - based on map experiments (45.04 specified in Wiki).
var U_TURN_ANGLE = 168.24; //U-Turn angle based on map experiments.
var GRAY_ZONE = 1.5; //Gray zone angle intended to prevent from irregularities observed on map.
var OVERLAPPING_ANGLE = 0.666; //Experimentally measured overlapping angle.
var ja_routing_type = {
BC: "junction_none",
KEEP: "junction_keep",
KEEP_LEFT: "junction_keep_left",
KEEP_RIGHT: "junction_keep_right",
TURN: "junction_turn",
TURN_LEFT: "junction_turn_left",
TURN_RIGHT: "junction_turn_right",
EXIT: "junction_exit",
EXIT_LEFT: "junction_exit_left",
EXIT_RIGHT: "junction_exit_right",
U_TURN: "junction_u_turn",
PROBLEM: "junction_problem",
NO_TURN: "junction_no_turn",
NO_U_TURN: "junction_no_u_turn",
ROUNDABOUT: "junction_roundabout",
ROUNDABOUT_EXIT: "junction_roundabout_exit",
OverrideBC: "Override_none",
OverrideCONTINUE: "Override_continue",
OverrideKEEP_LEFT: "Override_keep_left",
OverrideKEEP_RIGHT: "Override_keep_right",
OverrideTURN_LEFT: "Override_turn_left",
OverrideTURN_RIGHT: "Override_turn_right",
OverrideEXIT: "Override_exit",
OverrideEXIT_LEFT: "Override_exit_left",
OverrideEXIT_RIGHT: "Override_exit_right",
OverrideU_TURN: "Override_u_turn"
};
var ja_road_type = {
//Streets
NARROW_STREET: 22,
STREET: 1,
PRIMARY_STREET: 2,
//Highways
RAMP: 4,
FREEWAY: 3,
MAJOR_HIGHWAY: 6,
MINOR_HIGHWAY: 7,
//Other drivable
DIRT_ROAD: 8,
FERRY: 14,
PRIVATE_ROAD: 17,
PARKING_LOT_ROAD: 20,
//Non-drivable
WALKING_TRAIL: 5,
PEDESTRIAN_BOARDWALK: 10,
STAIRWAY: 16,
RAILROAD: 18,
RUNWAY: 19
};
var ja_vehicle_types = {
TRUCK: 1,
PUBLIC: 2,
TAXI: 4,
BUS: 8,
HOV2: 16,
HOV3: 32,
RV: 64,
TOWING: 128,
MOTORBIKE: 256,
PRIVATE: 512,
HAZ: 1024
};
var ja_settings = {
defaultOn: { elementType: "checkbox", elementId: "_jaCbShowLayer", defaultValue: true },
angleMode: { elementType: "select", elementId: "_jaSelAngleMode", defaultValue: "aDeparture", options: ["aAbsolute", "aDeparture"]},
angleDisplay: { elementType: "select", elementId: "_jaSelAngleDisplay", defaultValue: "displayFancy", options: ["displayFancy", "displaySimple"]},
angleDisplayArrows: { elementType: "select", elementId: "_jaSelAngleDisplayArrows", defaultValue: "⇐⇒⇖⇗⇑", options: ["<><>^", "⇦⇨⇦⇨⇧", "⇐⇒⇐⇒⇑", "←→←→↑", "⇐⇒⇖⇗⇑", "←→↖↗↑"]},
override: { elementType: "checkbox", elementId: "_jaCbOverride", defaultValue: true, group: "guess" },
overrideAngles: { elementType: "checkbox", elementId: "_jaCboverrideAngles", defaultValue: false, group: "override" },
guess: { elementType: "checkbox", elementId: "_jaCbGuessRouting", defaultValue: true },
noInstructionColor: { elementType: "color", elementId: "_jaTbNoInstructionColor", defaultValue: "#ffffff", group: "guess"},
continueInstructionColor: { elementType: "color", elementId: "_jaTbContinueInstructionColor", defaultValue: "#ffffff", group: "guess"},
keepInstructionColor: { elementType: "color", elementId: "_jaTbKeepInstructionColor", defaultValue: "#cbff84", group: "guess"},
exitInstructionColor: { elementType: "color", elementId: "_jaTbExitInstructionColor", defaultValue: "#6cb5ff", group: "guess"},
turnInstructionColor: { elementType: "color", elementId: "_jaTbTurnInstructionColor", defaultValue: "#4cc600", group: "guess"},
uTurnInstructionColor: { elementType: "color", elementId: "_jaTbUTurnInstructionColor", defaultValue: "#b66cff", group: "guess"},
noTurnColor: { elementType: "color", elementId: "_jaTbNoTurnColor", defaultValue: "#a0a0a0", group: "guess"},
problemColor: { elementType: "color", elementId: "_jaTbProblemColor", defaultValue: "#feed40", group: "guess"},
roundaboutOverlayDisplay: { elementType: "select", elementId: "_jaSelRoundaboutOverlayDisplay", defaultValue: "rOverNever", options: ["rOverNever","rOverSelected","rOverAlways"]},
roundaboutOverlayColor: { elementType: "color", elementId: "_jaTbRoundaboutOverlayColor", defaultValue: "#aa0000", group: "roundaboutOverlayDisplay"},
roundaboutColor: { elementType: "color", elementId: "_jaTbRoundaboutColor", defaultValue: "#ff8000", group: "roundaboutOverlayDisplay"},
decimals: { elementType: "number", elementId: "_jaTbDecimals", defaultValue: 2, min: 0, max: 2},
pointSize: { elementType: "number", elementId: "_jaTbPointSize", defaultValue: 12, min: 6, max: 20}
};
var ja_arrow = {
get: function(at) {
var arrows = ja_getOption("angleDisplayArrows");
return arrows[at % arrows.length];
},
left: function() { return this.get(0); },
right: function() { return this.get(1); },
left_up: function() { return this.get(2); },
right_up: function() { return this.get(3); },
up: function() { return this.get(4); }
};
var ja_calculation_Interval = {
set: function(){
this.clear();
ja_log("Starting IntervalID", 2);
this.IntervalID = window.setInterval(ja_calculate, 500);
//console.log("this",this);
},
clear: function(){
if(typeof this.IntervalID === "number"){
ja_log("Cleared IntervalID ID : " + this.IntervalID, 2);
window.clearInterval(this.IntervalID);
delete this.IntervalID;
ja_calculate();
//console.log("this",this);
}
}
};
function testSelectedItem(){
if (window.W.selectionManager.getSelectedFeatures().length > 1) { return; }
var registerInterval = false;
window.W.selectionManager.getSelectedFeatures().forEach(function(element) {
switch (element._wmeObject.type) {
case "node":
case "segment":
registerInterval = true;
break;
default:
break;
}
});
if (registerInterval == true){
ja_calculation_Interval.set();
}else{
ja_calculation_Interval.clear();
}
ja_log("ja_calculation_Interval.start = " + registerInterval,2);
}
/*
* Main logic functions
*/
function junctionangle_init() {
//Listen for selected nodes change event
//window.W.selectionManager.events.register("selectionchanged", null, ja_calculate);
window.W.selectionManager.events.register("selectionchanged", null, testSelectedItem);
//Temporary workaround. Beta editor changed the event listener logic, but live is still using the old version
//if-else should be removed once not needed anymore
/* if("events" in window.W.model.segments) {
//Live
window.W.model.segments.events.on({
"objectschanged": ja_calculate,
"objectsremoved": ja_calculate
});
window.W.model.nodes.events.on({
"objectschanged": ja_calculate,
"objectsremoved": ja_calculate
});
} else if("_events" in window.W.model.segments) {
*/ //Beta editor
window.W.model.segments.on({
"objectschanged": ja_calculate,
"objectsremoved": ja_calculate
});
window.W.model.nodes.on({
"objectschanged": ja_calculate,
"objectsremoved": ja_calculate
});
// }
//Recalculate on zoom end also
window.W.map.olMap.events.register("zoomend", null, ja_calculate);
window.W.map.olMap.events.register("move", null, ja_calculate);
ja_load();
ja_loadTranslations();
setupHtml();
//Add support for translations. Default (and fallback) is "en".
//Note, don't make typos in "acceleratorName", as it has to match the layer name (with whitespace removed)
// to actually work. Took me a while to figure that out...
I18n.translations[window.I18n.locale].layers.name.junction_angles = ja_getMessage("name");
/**
* Initialize JAI OpenLayers vector layer
*/
if (window.W.map.getLayersBy("uniqueName","junction_angles").length === 0) {
// Create a vector layer and give it your style map.
ja_mapLayer = new window.OpenLayers.Layer.Vector(ja_getMessage("name"), {
displayInLayerSwitcher: true,
uniqueName: "junction_angles",
shortcutKey: "S+j",
accelerator: "toggle" + ja_getMessage("name").replace(/\s+/g,''),
className: "junction-angles",
styleMap: new window.OpenLayers.StyleMap(ja_style())
});
//Set visibility according to user preference
//ja_mapLayer.setVisibility(ja_getOption("defaultOn"));
window.W.map.addLayer(ja_mapLayer);
ja_log("version " + junctionangle_version + " loaded.", 0);
ja_log(window.W.map, 3);
ja_log(window.W.model, 3);
ja_log(window.W.loginManager, 3);
ja_log(window.W.selectionManager, 3);
ja_log(ja_mapLayer, 3);
ja_log(window.OpenLayers, 3);
} else {
ja_log("Oh, nice.. We already had a layer?", 3);
}
WazeWrap.Interface.AddLayerCheckbox("display", "Junction Angle Info", ja_getOption("defaultOn"), layerToggled);
layerToggled(ja_getOption("defaultOn"))
ja_apply();
// MTE mode event
/*
W.app.modeController.model.bind('change:mode', function(){
if (W.app.modeController.getState() === undefined){
createToggler();
setupHtml();
ja_apply();
}
});
*/
// reload after changing WME units
W.prefs.on('change:isImperial', function(){
setupHtml();
ja_apply();
});
ja_calculate();
}
function setupHtml(){
var i, ja_select_option, navTabs, tabContent;
var ja_settings_dom = document.createElement("div");
var ja_settings_dom_panel = document.createElement("div");
var ja_settings_dom_content = document.createElement("div");
var ja_settings_header = document.createElement('h4');
var style = document.createElement('style');
var form = document.createElement('form');
var section = document.createElement('div');
var ja_reset_button = document.createElement('button');
var userTabs = document.getElementById('user-info');
var ja_info = document.createElement('ul');
var ja_version_elem = document.createElement('li');
var jatab = document.createElement('li');
/**
* Add JAI tab configuration options
*/
ja_settings_dom_panel.className = "side-panel-section";
ja_settings_dom_content.className = "tab-content";
ja_settings_header.appendChild(document.createTextNode(ja_getMessage("settingsTitle")));
ja_settings_dom_content.appendChild(ja_settings_header);
style.appendChild(document.createTextNode(function () {/*
#jaOptions > *:first-child {
margin-top: 1em;
}
#jaOptions * {
vertical-align: middle;
}
#jaOptions label {
display: inline;
}
#jaOptions input, select {
display: inline;
margin-right: 7px;
box-sizing: border-box;
border: 1px solid #cccccc;
border-radius: 5px;
padding: 3px;
}
#jaOptions input[type="number"] {
width: 4em;
padding: 6px;
}
#jaOptions input[type="color"] {
width: 15%;
height: 2em;
padding: 4px;
}
@supports (-webkit-appearance:none) {
#jaOptions input[type="color"] {
padding: 0px 2px 0px 2px;
}
}
#jaOptions .disabled {
position: relative;
}
#jaOptions .disabled:after {
content: " ";
z-index: 10;
display: block;
position: absolute;
height: 100%;
top: 0;
left: 0;
right: 0;
background: rgba(255, 255, 255, 0.666);
}
*/}.toString().match(/[^]*\/\*([^]*)\*\/\}$/)[1]));
section.className = "form-group";
form.className = "attributes-form side-panel-section";
section.id = "jaOptions";
ja_log("---------- Creating settings HTML ----------", 2);
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
var ja_controls_container = document.createElement('div');
var ja_input = document.createElement('input');
var ja_label = document.createElement('label');
ja_controls_container.className = "controls-container";
ja_input.type = setting.elementType;
switch (setting.elementType) {
case 'color':
ja_input.id = setting.elementId;
ja_controls_container.appendChild(ja_input);
break;
case 'number':
ja_input.id = setting.elementId;
ja_input.setAttribute("min", setting.min);
ja_input.setAttribute("max", setting.max);
ja_controls_container.appendChild(ja_input);
break;
/*
case 'text':
ja_input.id = setting.elementId;
ja_input.size = (setting.max ? setting.max : 8);
ja_input.maxlength = (setting.max ? setting.max : 7);
ja_controls_container.appendChild(ja_input);
break;
*/
case 'checkbox':
ja_input.id = setting.elementId;
ja_controls_container.appendChild(ja_input);
break;
case 'select':
ja_input = document.createElement('select'); //Override <input> with <select>
ja_input.id = setting.elementId;
for(i = 0; i < setting.options.length; i++) {
ja_select_option = document.createElement('option');
ja_select_option.value = setting.options[i];
ja_select_option.appendChild(document.createTextNode(ja_getMessage(setting.options[i])));
ja_input.appendChild(ja_select_option);
}
ja_controls_container.appendChild(ja_input);
break;
default:
ja_log("Unknown setting type " + setting.elementType, 2);
}
ja_input.onchange = function() { ja_onchange(this); };
ja_label.setAttribute("for", setting.elementId);
ja_label.appendChild(document.createTextNode(ja_getMessage(a)));
ja_controls_container.appendChild(ja_label);
section.appendChild(ja_controls_container);
});
section.appendChild(document.createElement('br'));
ja_reset_button.type = "button";
ja_reset_button.className = "btn btn-default";
ja_reset_button.addEventListener("click", ja_reset, true);
ja_reset_button.appendChild(document.createTextNode(ja_getMessage("resetToDefault")));
section.appendChild(document.createElement('div'));
section.appendChild(ja_reset_button);
form.appendChild(section);
ja_settings_dom_content.appendChild(form);
navTabs = userTabs.getElementsByClassName('nav-tabs')[0];
tabContent = userTabs.getElementsByClassName('tab-content')[0];
ja_settings_dom.id = "sidepanel-ja";
ja_settings_dom.className = "tab-pane";
ja_settings_dom_content.style.paddingTop = "0";
ja_settings_dom.appendChild(style);
ja_settings_dom_panel.appendChild(ja_settings_dom_content);
ja_settings_dom.appendChild(ja_settings_dom_panel);
//Add some version info etc
ja_info.className = "list-unstyled -side-panel-section";
ja_info.style.fontSize = "11px";
ja_version_elem.appendChild(document.createTextNode(ja_getMessage("name") + ": v" + junctionangle_version));
ja_info.appendChild(ja_version_elem);
//Add some useful links
ja_info.appendChild(ja_helpLink(
'https://wiki.waze.com/wiki/Roundabouts/USA#Understanding_navigation_instructions', 'roundaboutnav')
);
ja_info.appendChild(ja_helpLink('https://www.waze.com/forum/viewtopic.php?f=819&t=61926', 'ghissues'));
ja_settings_dom.appendChild(ja_info);
tabContent.appendChild(ja_settings_dom);
jatab.innerHTML = '<!--suppress HtmlUnknownAnchorTarget --><a href="#sidepanel-ja" data-toggle="tab">JAI</a>';
if(navTabs != null) { navTabs.appendChild(jatab); }
}
function layerToggled(visible) {
ja_mapLayer.setVisibility(visible);
}
function ja_guess_routing_instruction(node, s_in_a, s_out_a, angles) {
/**********************************************************************************
* @param node Junction node
* @param s_in_a "In" segment id
* @param s_out_a "Out" segment id
* @param angles array of segment absolute angles [0] angle, [1] segment id, 2[?]
* @returns {string}
**********************************************************************************/
var s_n = {}, s_in = null, s_out = {}, street_n = {}, street_in = null, angle;
var s_in_id = s_in_a;
var s_out_id = s_out_a;
ja_log("Guessing routing instructions from " + s_in_a + " via node " + node.attributes.id + " to " + s_out_a,2);
ja_log(node, 4);
ja_log(s_in_a, 4);
ja_log(s_out_a, 4);
ja_log(angles, 3);
s_in_a = window.$.grep(angles, function(element){
return element[1] === s_in_a;
});
s_out_a = window.$.grep(angles, function(element){
return element[1] === s_out_a;
});
node.attributes.segIDs.forEach(function(element) {
if (element === s_in_id) {
s_in = getByID(node.model.segments,element);
street_in = ja_get_streets(element);
//Set empty name for streets if not defined
if(typeof street_in.primary === 'undefined') { street_in.primary = {}; }
if(typeof street_in.primary.name === 'undefined') {
street_in.primary.name = "";
}
} else {
if(element === s_out_id) {
//store for later use
s_out[element] = getByID(node.model.segments,element);
//Set empty name for streets if not defined
if(typeof s_out[element].primary === 'undefined') {
s_out[element].primary = { name: "" };
}
}
s_n[element] = getByID(node.model.segments,element);
street_n[element] = ja_get_streets(element);
if(typeof street_n[element].primary === 'undefined') {
street_n[element].primary = { name: ""};
}
}
});
ja_log(s_n, 3);
ja_log(street_n,3);
ja_log(s_in,3);
ja_log(street_in,2);
if (s_in === null || street_in === null) {
//Should never happen, but adding to make code validation happy
return ja_routing_type.PROBLEM;
}
angle = ja_angle_diff(s_in_a[0], (s_out_a[0]), false);
ja_log("turn angle is: " + angle, 2);
//Check turn possibility first
if(!ja_is_turn_allowed(s_in, node, s_out[s_out_id])) {
ja_log("Turn is disallowed!", 2);
return ja_routing_type.NO_TURN;
}
//seb-d59:
//Check override instruction
if (ja_getOption("override")){
var WazeModelGraphTurnData = window.require("Waze/Model/Graph/TurnData");
var turn = new WazeModelGraphTurnData();
turn = window.W.model.getTurnGraph().getTurnThroughNode(node, getByID(window.W.model.segments,s_in_id), getByID(window.W.model.segments,s_out_id));
var opcode = turn.getTurnData().getInstructionOpcode();
switch (opcode) {
case "NONE":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideBC;
break;
case "CONTINUE":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideCONTINUE;
break;
case "TURN_LEFT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideTURN_LEFT;
break;
case "TURN_RIGHT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideTURN_RIGHT;
break;
case "KEEP_LEFT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideKEEP_LEFT;
break;
case "KEEP_RIGHT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideKEEP_RIGHT;
break;
case "EXIT_LEFT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideEXIT_LEFT;
break;
case "EXIT_RIGHT":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideEXIT_RIGHT;
break;
case "UTURN":
ja_log("turn opcode override is: " + opcode, 2);
return ja_routing_type.OverrideU_TURN;
break;
default:
ja_log("no turn opcode override", 2);
}
}
//Roundabout - no true instruction guessing here!
if (s_in.attributes.junctionID) {
if (s_out[s_out_id].attributes.junctionID) {
ja_log("Roundabout continuation - no instruction", 2);
return ja_routing_type.BC;
} else {
ja_log("Roundabout exit - no instruction", 2);
//exit just to visually distinguish from roundabout continuation
return ja_routing_type.ROUNDABOUT_EXIT;
}
} else if (s_out[s_out_id].attributes.junctionID) {
ja_log("Roundabout entry - no instruction", 2);
//no instruction since it's normally the only continuation - true instruction can be computed for
//entry-exit selection only
return ja_routing_type.BC;
}
//Check for U-turn, which is emitted even if there is only one s-out
if (Math.abs(angle) > U_TURN_ANGLE + GRAY_ZONE) {
ja_log("Angle is >= 170 - U-Turn", 2);
return ja_routing_type.U_TURN;
} else if (Math.abs(angle) > U_TURN_ANGLE - GRAY_ZONE) {
ja_log("Angle is in gray zone 169-171", 2);
return ja_routing_type.PROBLEM;
}
//No other possible turns
if(node.attributes.segIDs.length <= 2) {
ja_log("Only one possible turn - no instruction", 2);
return ja_routing_type.BC;
} //No instruction
/*
*
* Here be dragons!
*
*/
if(Math.abs(angle) < TURN_ANGLE - GRAY_ZONE) {
ja_log("Turn is <= 44", 2);
/*
* Filter out disallowed and non-"BC eligible" turns.
*/
ja_log("Original angles and street_n:", 2);
ja_log(angles, 2);
ja_log(street_n, 2);
ja_log(s_n, 2);
angles = angles.filter(function (a) {
ja_log("Filtering angle: " + ja_angle_diff(s_in_a, a[0], false), 2);
if(s_out_id === a[1] ||
(typeof s_n[a[1]] !== 'undefined' &&
ja_is_turn_allowed(s_in, node, s_n[a[1]]) &&
Math.abs(ja_angle_diff(s_in_a, a[0], false)) < TURN_ANGLE //Any angle above 45.04 is not eligible
)) {
ja_log(true, 4);
return true;
} else {
ja_log(false, 4);
if(street_n[a[1]]) {
delete s_n[a[1]];
delete street_n[a[1]];
}
return false;
}
});
ja_log("Filtered angles and street_n:", 2);
ja_log(angles, 2);
ja_log(street_n, 2);
ja_log(s_n, 2);
if(angles.length <= 1) {
ja_log("Only one allowed turn left", 2);
return ja_routing_type.BC;
} //No instruction
/*
* Apply simplified BC logic
*/
var bc_matches = {}, bc_prio = 0, bc_count = 0;
var bc_collect = function(a, prio) {
ja_log("Potential BC = " + prio, 2);
ja_log(a, 2);
if (prio > bc_prio) { //highest priority wins now
bc_matches = {};
bc_prio = prio;
bc_count = 0;
}
if (prio === bc_prio) {
bc_matches[a[1]] = a;
bc_count++;
}
ja_log("BC candidates:", 2);
ja_log(bc_matches, 2);
};
//Check each eligible turn against routing rules
for(var k=0; k< angles.length; k++) {
var a = angles[k];
ja_log("Checking angle " + k, 2);
ja_log(a, 2);
var tmp_angle = ja_angle_diff(s_in_a[0], a[0], false);
ja_log(tmp_angle, 2);
var tmp_s_out = {};
tmp_s_out[a[1]] = s_n[a[1]];
var tmp_street_out = {};
tmp_street_out[a[1]] = street_n[a[1]];
var name_match = ja_primary_name_match(street_in, tmp_street_out) ||
ja_alt_name_match(street_in, tmp_street_out) ||
ja_cross_name_match(street_in, tmp_street_out);
if(name_match && ja_segment_type_match(s_in, tmp_s_out)) {
ja_log("BC name and type match", 2);
bc_collect(a, 3);
} else if(name_match) {
ja_log("BC name match", 2);
bc_collect(a, 2);
} else if(ja_segment_type_match(s_in, tmp_s_out)) {
ja_log("BC type match", 2);
bc_collect(a, 1);
}
//Else: Non-BC
}
//If s-out is the only BC, that's it.
if (bc_matches[s_out_id] !== undefined && bc_count === 1) {
ja_log("\"straight\": no instruction", 2);
return ja_routing_type.BC;
}
ja_log("BC logic did not apply; using old default rules instead.", 2);
//FZ69617: Sort angles in left most first order
ja_log("Unsorted angles", 4);
ja_log(angles, 4);
angles.sort(function(a, b) { return ja_angle_dist(a[0], s_in_a[0][0]) - ja_angle_dist(b[0], s_in_a[0][0]); });
ja_log("Sorted angles", 4);
ja_log(angles, 4);
//wlodek76: FIXING KEEP LEFT/RIGHT regarding to left most segment
//WIKI WAZE: When there are more than two segments less than 45.04°, only the left most segment will be
// KEEP LEFT, all the rest will be KEEP RIGHT
//FZ69617: Wiki seems to be wrong here - experiments shows that "more than two" must be read as "at least two"
//FZ69617: Wiki also does not mention differences between RHT and LHT countries for this consideration,
// but map experiments seem to prove that we have to use reverse logic for LHT countries.
if (!s_in.model.isLeftHand) { //RHT
if (angles[0][1] === s_out_id) { //s-out is left most segment
//wlodek76: KEEP LEFT/RIGHT overlapping case
//WIKI WAZE: If the left most segment is overlapping another segment, it will also be KEEP RIGHT.
if (!ja_overlapping_angles(angles[0][0], angles[1][0])) {
ja_log("Left most <45 segment: keep left", 2);
return ja_routing_type.KEEP_LEFT;
}
}
} else { //LHT
//FZ69617: KEEP RIGHT/LEFT logic for right most segment
//MISSING IN WIKI: When there are at least two segments less than 45.04°, only the right most segment will
// be KEEP RIGHT, all the rest will be KEEP LEFT
if (angles[angles.length - 1][1] === s_out_id) { //s-out is right most segment
//FZ69617: KEEP RIGHT/LEFT overlapping case
//MISSING IN WIKI: If the right most segment is overlapping another segment, it will also be KEEP LEFT.
if (!ja_overlapping_angles(angles[angles.length - 1][0], angles[angles.length - 2][0])) {
ja_log("Right most <45 segment: keep right", 2);
return ja_routing_type.KEEP_RIGHT;
}
}
}
//FZ69617: Two overlapping segments logic
//WAZE WIKI: If the only two segments less than 45.04° overlap each other, neither will get an instruction.
//...
//wlodek76: Three overlapping segments logic
//MISSING IN WIKI: If the ONLY THREE segments less than 45.04° overlap each other, neither will get an instruction.
//...
//FZ69617: Two or more overlapping segments logic
//MISSING IN WIKI: If there are two or more segments less than 45.04° and all these segmentes overlap each other,
// neither will get an instruction.
var overlap_i = 1;
while(overlap_i < angles.length &&
ja_overlapping_angles(angles[0][0], angles[overlap_i][0])) {
++overlap_i;
}
if(overlap_i > 1 && overlap_i === angles.length) {
ja_log("Two or more overlapping segments only: no instruction", 2);
return ja_routing_type.BC;
}
//Primary to non-primary
if(ja_is_primary_road(s_in) && !ja_is_primary_road(s_out[s_out_id])) {
ja_log("Primary to non-primary = exit", 2);
return s_in.model.isLeftHand ? ja_routing_type.EXIT_LEFT : ja_routing_type.EXIT_RIGHT;
}
//Ramp to non-primary or non-ramp
if(ja_is_ramp(s_in) && !ja_is_primary_road(s_out[s_out_id]) && !ja_is_ramp(s_out[s_out_id]) ) {
ja_log("Ramp to non-primary and non-ramp = exit", 2);
return s_in.model.isLeftHand ? ja_routing_type.EXIT_LEFT : ja_routing_type.EXIT_RIGHT;
}
ja_log("DEFAULT: keep", 2);
return s_in.model.isLeftHand ? ja_routing_type.KEEP_LEFT : ja_routing_type.KEEP_RIGHT;
} else if (Math.abs(angle) < TURN_ANGLE + GRAY_ZONE) {
ja_log("Angle is in gray zone 44-46", 2);
return ja_routing_type.PROBLEM;
} else {
ja_log("Normal turn", 2);
return ja_routing_type.TURN; //Normal turn (left|right)
}
}
function findLayer(partOf_id){
var layer;
for (var i=0; i < window.W.map.layers.length; i++){
if (window.W.map.layers[i].id.search(partOf_id) != -1){
layer={id: window.W.map.layers[i].id, name: window.W.map.layers[i].name, number : i};
ja_log("Number: " + i + "; id : " + layer.id + "; name :" + layer.name ,3);
return layer;
}
}
}
function testLayerZIndex(){
// seb-d59:
// Here i search the selection layer and i read the z-index
// and put JAI's layer under this one.
var zIndex = 0;
ja_mapLayer.setZIndex(500);
// now selection layer has no name ...
var layer = {}
layer = findLayer("OpenLayers_Layer_Vector_RootContainer");
var layerOBJ = window.W.map.layers[layer.number];
//ja_log("id : " + layerOBJ.id + "; name :" + layerOBJ.name + " zIndex: " + layerOBJ.getZIndex() ,3);
zIndex = parseInt(layerOBJ.getZIndex()) - 1 ;
ja_mapLayer.setZIndex(zIndex);
ja_log("ja_mapLayer new zIndex: " + ja_mapLayer.getZIndex() ,3);
}
function ja_calculate_real() {
var ja_start_time = Date.now();
var ja_nodes = [];
var restart = false;
ja_log("Actually calculating now", 2);
ja_roundabout_points = [];
ja_log(window.W.map, 3);
if (typeof ja_mapLayer === 'undefined') {
return;
}
//clear old info
ja_mapLayer.destroyFeatures();
testLayerZIndex();
if (ja_getOption("roundaboutOverlayDisplay") === "rOverAlways") {
ja_draw_roundabout_overlay();
}
//try to show all angles for all selected segments
if (window.W.selectionManager.getSelectedFeatures().length === 0) { return; }
ja_log("Checking junctions for " + window.W.selectionManager.getSelectedFeatures().length + " segments", 2);
window.W.selectionManager.getSelectedFeatures().forEach(function(element) {
ja_log(element, 3);
switch (element._wmeObject.type) {
case "node":
ja_nodes.push(element._wmeObject.attributes.id);
break;
case "segment":
//segments selected?
if (element._wmeObject.attributes.fromNodeID != null &&
ja_nodes.indexOf(element._wmeObject.attributes.fromNodeID) === -1) {
ja_nodes.push(element._wmeObject.attributes.fromNodeID);
}
if (element._wmeObject.attributes.toNodeID != null &&
ja_nodes.indexOf(element._wmeObject.attributes.toNodeID) === -1) {
ja_nodes.push(element._wmeObject.attributes.toNodeID);
}
break;
case "venue":
break;
default:
ja_log("Found unknown item type: " + element._wmeObject.type, 2);
break;
}
ja_log(ja_nodes, 2);
});
//Figure out if we have a selected roundabout and do some magic
var ja_selected_roundabouts = {};
ja_nodes.forEach(function(node) {
ja_log(getByID(window.W.model.nodes,node), 3);
var tmp_s = null, tmp_n = null, tmp_junctionID = null;
if(getByID(window.W.model.nodes,node) == null ||
typeof getByID(window.W.model.nodes,node).attributes.segIDs === 'undefined') {
return;
}
getByID(window.W.model.nodes,node).attributes.segIDs.forEach(function(segment) {
ja_log(segment, 3);
if(getByID(window.W.model.segments,segment).attributes.junctionID) {
ja_log("Roundabout detected: " + getByID(window.W.model.segments,segment).attributes.junctionID, 3);
tmp_junctionID = getByID(window.W.model.segments,segment).attributes.junctionID;
} else {
tmp_s = segment;
tmp_n = node;
}
ja_log("tmp_s: " + (tmp_s === null ? 'null' : tmp_s), 3);
});
ja_log("final tmp_s: " + (tmp_s === null ? 'null' : tmp_s), 3);
if(tmp_junctionID === null) { return; }
if (ja_selected_roundabouts.hasOwnProperty(tmp_junctionID)) {
ja_selected_roundabouts[tmp_junctionID].out_s = tmp_s;
ja_selected_roundabouts[tmp_junctionID].out_n = node;
} else {
ja_selected_roundabouts[tmp_junctionID] = {
'in_s': tmp_s,
'in_n': tmp_n,
'out_s': null,
'out_n': null,
'p': getByID(window.W.model.junctions,tmp_junctionID).geometry
};
}
});
//Do some fancy painting for the roundabouts...
for(var tmp_roundabout in ja_selected_roundabouts) {
if (ja_selected_roundabouts.hasOwnProperty(tmp_roundabout)) {
ja_log(tmp_roundabout, 3);
ja_log(ja_selected_roundabouts[tmp_roundabout], 3);
//New roundabouts don't have coordinates yet..
if(typeof ja_selected_roundabouts[tmp_roundabout].p === 'undefined' ||
ja_selected_roundabouts[tmp_roundabout].out_n === null
) {
continue;
}
//Draw circle overlay for this roundabout
if(ja_getOption("roundaboutOverlayDisplay") === "rOverSelected") {
ja_draw_roundabout_overlay(tmp_roundabout);
}
//Transform LonLat to actual layer projection
var tmp_roundabout_center = ja_coordinates_to_point([ja_selected_roundabouts[tmp_roundabout].p.x, ja_selected_roundabouts[tmp_roundabout].p.y]);
var angle = ja_angle_between_points(
getByID(window.W.model.nodes,ja_selected_roundabouts[tmp_roundabout].in_n).geometry,
tmp_roundabout_center,
getByID(window.W.model.nodes,ja_selected_roundabouts[tmp_roundabout].out_n).geometry
);
ja_mapLayer.addFeatures([
new window.OpenLayers.Feature.Vector(
tmp_roundabout_center,
{
angle: ja_round(angle) + '°',
ja_type: ja_is_roundabout_normal(
tmp_roundabout,
ja_selected_roundabouts[tmp_roundabout].in_n) ? ja_routing_type.TURN : ja_routing_type.ROUNDABOUT
}
)
]);
}
}
var ja_label_distance;
/*
* Define a base distance to markers, depending on the zoom level
*/
switch (window.W.map.olMap.zoom) {
case 22: //10:
ja_label_distance = 2.8;
break;
case 21: //9:
ja_label_distance = 4;
break;
case 20: //8:
ja_label_distance = 8;
break;
case 19: //7:
ja_label_distance = 15;
break;
case 18: //6:
ja_label_distance = 25;
break;
case 17: //5:
ja_label_distance = 40;
break;
case 16: //4:
ja_label_distance = 80;
break;
case 15: //3:
ja_label_distance = 150;
break;
case 14: //2:
ja_label_distance = 300;
break;
case 13: //1:
ja_label_distance = 400;
break;
default:
ja_log("Unsupported zoom level: " + window.W.map.olMap.zoom + "!", 2);
}
ja_label_distance *= (1 + (0.2 * parseInt(ja_getOption("decimals"))));
ja_log("zoom: " + window.W.map.olMap.zoom + " -> distance: " + ja_label_distance, 2);
/**
* Collect double-turn (inc. U-turn) segments info
*/
var doubleTurns = {
data: {}, //Structure: map<s_id, map<s_out_id, list<{s_in_id, angle, turn_type}>>>
collect: function (s_id, s_in_id, s_out_id, angle, turn_type) {
ja_log("Collecting double-turn path from " + s_in_id + " to " + s_out_id
+ " via " + s_id + " with angle " + angle + " type: " + turn_type, 2);
var info = this.data[s_id];
if (info === undefined) {
info = this.data[s_id] = {};
}
var list = info[s_out_id];
if (list === undefined) {
list = info[s_out_id] = [];
}
list.push({ s_in_id: s_in_id, angle: angle, turn_type: turn_type });
},
forEachItem: function (s_id, s_out_id, fn) {
var info = this.data[s_id];
if (info !== undefined) {
var list = info[s_out_id];
if (list !== undefined) {
list.forEach(function(item, i) {
fn(item, i);
});
}
}
}
};
//Loop through all 15m or less long segments and collect double-turn disallowed ones
if (ja_getOption("angleMode") === "aDeparture" && ja_nodes.length > 1) {
window.W.selectionManager.getSelectedFeatures().forEach(function (selectedSegment) {
var segmentId = selectedSegment._wmeObject.attributes.id;
var segment = window.W.model.segments.objects[segmentId];
ja_log("Checking " + segmentId + " for double turns ...", 2);
var len = ja_segment_length(segment);
ja_log("Segment " + segmentId + " length: " + len, 2);
if (Math.round(len) <= 15) {
var fromNode = getByID(window.W.model.nodes,segment.attributes.fromNodeID);
var toNode = getByID(window.W.model.nodes,segment.attributes.toNodeID);
var a_from = ja_getAngleMidleSeg(segment.attributes.fromNodeID, segment);
var a_to = ja_getAngleMidleSeg(segment.attributes.toNodeID, segment);
fromNode.attributes.segIDs.forEach(function (fromSegmentId) {
if (fromSegmentId === segmentId) return;
var fromSegment = window.W.model.segments.objects[fromSegmentId];
if(!ja_is_up_to_primary_road(fromSegment)) return;
var from_a = ja_getAngle(segment.attributes.fromNodeID, fromSegment);
var from_angle = ja_angle_diff(from_a, a_from, false);
ja_log("Segment from " + fromSegmentId + " angle: " + from_a + ", turn angle: " + from_angle, 2);
toNode.attributes.segIDs.forEach(function (toSegmentId) {
if (toSegmentId === segmentId) return;
var toSegment = window.W.model.segments.objects[toSegmentId];
if(!ja_is_up_to_primary_road(toSegment)) return;
var to_a = ja_getAngle(segment.attributes.toNodeID, toSegment);
var to_angle = ja_angle_diff(to_a, a_to, false);
ja_log("Segment to " + toSegmentId + " angle: " + to_a + ", turn angle: " + to_angle, 2);
var angle = Math.abs(to_angle - from_angle);
ja_log("Angle from " + fromSegmentId + " to " + toSegmentId + " is: " + angle, 2);
//Determine whether a turn is disallowed
if (angle >= 175 - GRAY_ZONE && angle <= 185 + GRAY_ZONE) {
var turn_type = (angle >= 175 + GRAY_ZONE && angle <= 185 - GRAY_ZONE) ?
ja_routing_type.NO_U_TURN : ja_routing_type.PROBLEM;
if (ja_is_turn_allowed(fromSegment, fromNode, segment) &&
ja_is_turn_allowed(segment, toNode, toSegment)) {
doubleTurns.collect(segmentId, fromSegmentId, toSegmentId, angle, turn_type);
}
if (ja_is_turn_allowed(toSegment, toNode, segment) &&
ja_is_turn_allowed(segment, fromNode, fromSegment)) {
doubleTurns.collect(segmentId, toSegmentId, fromSegmentId, angle, turn_type);
}
}
});
});
}
});
}
ja_log("Collected double-turn segments:", 2);
ja_log(doubleTurns.data, 2);
//Start looping through selected nodes
for (var i = 0; i < ja_nodes.length; i++) {
var node = getByID(window.W.model.nodes,ja_nodes[i]);
var angles = [];
var ja_selected_segments_count = 0;
var ja_selected_angles = [];
var a;
if (node == null || !node.hasOwnProperty('attributes')) {
//Oh oh.. should not happen? We want to use a node that does not exist
ja_log("Oh oh.. should not happen?",2);
ja_log(node, 2);
ja_log(ja_nodes[i], 2);
ja_log(window.W.model, 3);
ja_log(window.W.model.nodes, 3);
continue;
}
//check connected segments
var ja_current_node_segments = node.attributes.segIDs;
ja_log(node, 2);
//ignore of we have less than 2 segments
if (ja_current_node_segments.length <= 1) {
ja_log("Found only " + ja_current_node_segments.length + " connected segments at " + ja_nodes[i] +
", not calculating anything...", 2);
continue;
}
ja_log("Calculating angles for " + ja_current_node_segments.length + " segments", 2);
ja_log(ja_current_node_segments, 3);
ja_current_node_segments.forEach(function (nodeSegment, j) {
var s = window.W.model.segments.objects[nodeSegment];
if(typeof s === 'undefined') {
//Meh. Something went wrong, and we lost track of the segment. This needs a proper fix, but for now
// it should be sufficient to just restart the calculation
ja_log("Failed to read segment data from model. Restarting calculations.", 1);
if(ja_last_restart === 0) {
ja_last_restart = new Date().getTime();
setTimeout(function(){ja_calculate();}, 500);
}
restart = true;
}
a = ja_getAngle(ja_nodes[i], s);
ja_log("Segment " + nodeSegment + " angle is " + a, 2);
angles[j] = [a, nodeSegment, s == null ? false : s.isSelected()];
if (s == null ? false : s.isSelected()) {
ja_selected_segments_count++;
}
});
if(restart) { return; }
//make sure we have the selected angles in correct order
ja_log(ja_current_node_segments, 3);
window.W.selectionManager.getSelectedFeatures().forEach(function (selectedSegment) {
var selectedSegmentId = selectedSegment._wmeObject.attributes.id;
ja_log("Checking if " + selectedSegmentId + " is in current node", 3);
if(ja_current_node_segments.indexOf(selectedSegmentId) >= 0) {
ja_log("It is!", 4);
//find the angle
for(var j=0; j < angles.length; j++) {
if(angles[j][1] === selectedSegmentId) {
ja_selected_angles.push(angles[j]);
break;
}
}
} else {
ja_log("It's not..", 4);
}
});
ja_log(angles, 3);
var ha, point;
//if we have two connected segments selected, do some magic to get the turn angle only =)
if (ja_selected_segments_count === 2) {
var ja_extra_space_multiplier = 1;
a = ja_angle_diff(ja_selected_angles[0][0], ja_selected_angles[1][0], false);
ha = (parseFloat(ja_selected_angles[0][0]) + parseFloat(ja_selected_angles[1][0]))/2;
if((Math.abs(ja_selected_angles[0][0]) + Math.abs(ja_selected_angles[1][0])) > 180 &&
((ja_selected_angles[0][0] < 0 && ja_selected_angles[1][0] > 0) ||
(ja_selected_angles[0][0] > 0 && ja_selected_angles[1][0] < 0))
) {
ha += 180;
}
if (Math.abs(a) > 120) {
ja_log("Sharp angle", 2);
ja_extra_space_multiplier = 2;
}
//Move point a bit if it's on the top (Bridge icon will obscure it otherwise)
if(ha > 40 && ha < 120) { ja_extra_space_multiplier = 2; }
ja_log("Angle between " + ja_selected_angles[0][1] + " and " + ja_selected_angles[1][1] + " is " +
a + " and position for label should be at " + ha, 3);
//Guess some routing instructions based on segment types, angles etc
var ja_junction_type = ja_routing_type.TURN; //Default to old behavior
if(ja_getOption("guess")) {
ja_log(ja_selected_angles, 2);
ja_log(angles, 2);
ja_junction_type =
ja_guess_routing_instruction(node, ja_selected_angles[0][1], ja_selected_angles[1][1], angles);
ja_log("Type is: " + ja_junction_type, 2);
}
//get the initial marker point
point = new window.OpenLayers.Geometry.Point(
node.getOLGeometry().x + (ja_extra_space_multiplier * ja_label_distance * Math.cos((ha * Math.PI) / 180)),
node.getOLGeometry().y + (ja_extra_space_multiplier * ja_label_distance * Math.sin((ha * Math.PI) / 180))
);
ja_draw_marker(point, node, ja_label_distance, a, ha, true, ja_junction_type);
//draw double turn markers
doubleTurns.forEachItem(ja_selected_angles[0][1], ja_selected_angles[1][1], function(item) {
ja_draw_marker(point, node, ja_label_distance, item.angle, ha, true, item.turn_type);
});
}
else {
//sort angle data (ascending)
angles.sort(function (a, b) {
return a[0] - b[0];
});
ja_log(angles, 3);
ja_log(ja_selected_segments_count, 3);
//get all segment angles
angles.forEach(function(angle, j) {
a = (360 + (angles[(j + 1) % angles.length][0] - angle[0])) % 360;
ha = (360 + ((a / 2) + angle[0])) % 360;
var a_in = angles.filter(function(a) {
return !!a[2];
})[0];
//Show only one angle for nodes with only 2 connected segments and a single selected segment
// (not on both sides). Skipping the one > 180
if (ja_selected_segments_count === 1 &&
angles.length === 2 &&
a >=180 &&
ja_getOption("angleMode") !== "aDeparture"
) {
ja_log("Skipping marker, as we need only one of them", 2);
return;
}
if(ja_getOption("angleMode") === "aDeparture" && ja_selected_segments_count > 0) {
if(a_in[1] === angle[1]) {
ja_log("in == out. skipping.", 2);
return;
}
ja_log("Angle in:",2);
ja_log(a_in,2);
ja_log(ja_guess_routing_instruction(node, a_in[1], angle[1], angles), 2);
//FIXME: we might want to try to keep the marker on the segment, instead of just
//in the direction of the first part
ha = angle[0];
a = ja_angle_diff(a_in[0], angles[j][0], false);
point = new window.OpenLayers.Geometry.Point(
node.getOLGeometry().x + (ja_label_distance * 2 * Math.cos((ha * Math.PI) / 180)),
node.getOLGeometry().y + (ja_label_distance * 2 * Math.sin((ha * Math.PI) / 180))
);
ja_draw_marker(point, node, ja_label_distance, a, ha, true,
ja_getOption("guess") ?
ja_guess_routing_instruction(node, a_in[1], angle[1], angles) : ja_routing_type.TURN);
//draw double turn markers
doubleTurns.forEachItem(a_in[1], angle[1], function(item) {
ja_draw_marker(point, node, ja_label_distance, item.angle, ha, true, item.turn_type);
});
} else {
ja_log("Angle between " + angle[1] + " and " + angles[(j + 1) % angles.length][1] + " is " +
a + " and position for label should be at " + ha, 3);
point = new window.OpenLayers.Geometry.Point(
node.getOLGeometry().x + (ja_label_distance * 1.25 * Math.cos((ha * Math.PI) / 180)),
node.getOLGeometry().y + (ja_label_distance * 1.25 * Math.sin((ha * Math.PI) / 180))
);
ja_draw_marker(point, node, ja_label_distance, a, ha);
}
});
}
}
//testLayerZIndex();
ja_last_restart = 0;
var ja_end_time = Date.now();
ja_log("Calculation took " + String(ja_end_time - ja_start_time) + " ms", 2);
}
/*
* Drawing functions
*/
/**
*
* @param point Estimated point for marker
* @param node Node the marker is for
* @param ja_label_distance Arbitrary distance to be used in moving markers further away etc
* @param a Angle to display
* @param ha Angle to marker from node (FIXME: either point or ha is probably unnecessary)
* @param withRouting true: show routing guessing markers, false: show "normal" angle markers
* @param ja_junction_type If using routing, this needs to be set to the desired type
*/
function ja_draw_marker(point, node, ja_label_distance, a, ha, withRouting, ja_junction_type) {
//Try to estimate of the point is "too close" to another point
//(or maybe something else in the future; like turn restriction arrows or something)
//FZ69617: Exctract initial label distance from point
var ja_tmp_distance = Math.abs(ha) % 180 < 45 || Math.abs(ha) % 180 > 135 ?
(point.x - node.getOLGeometry().x) / (Math.cos((ha * Math.PI) / 180)) :
(point.y - node.getOLGeometry().y) / (Math.sin((ha * Math.PI) / 180));
ja_log("Starting distance estimation", 3);
while(ja_mapLayer.features.some(function(feature){
if(typeof feature.attributes.ja_type !== 'undefined' && feature.attributes.ja_type !== 'roundaboutOverlay') {
//Arbitrarily chosen minimum distance.. Should actually use the real bounds of the markers,
//but that didn't work out.. Bounds are always 0..
if(ja_label_distance / 1.4 > feature.geometry.distanceTo(point)) {
ja_log(ja_label_distance / 1.5 > feature.geometry.distanceTo(point) + " is kinda close..", 3);
return true;
}
}
return false;
})) {
//add 1/4 of the original distance and hope for the best =)
ja_tmp_distance += ja_label_distance / 4;
ja_log("setting distance to " + ja_tmp_distance, 2);
point = new window.OpenLayers.Geometry.Point(
node.getOLGeometry().x + (ja_tmp_distance * Math.cos((ha * Math.PI) / 180)),
node.getOLGeometry().y + (ja_tmp_distance * Math.sin((ha * Math.PI) / 180))
);
}
ja_log("Distance estimation done", 3);
var angleString = ja_round(Math.abs(a)) + "°";
//FZ69617: Add direction arrows for turn instructions only
if (ja_getOption("angleDisplay") === "displaySimple") {
switch(ja_junction_type) {
case ja_routing_type.TURN:
angleString = a > 0 ? ja_arrow.left() + angleString : angleString + ja_arrow.right();
break;
case ja_routing_type.TURN_LEFT:
angleString = ja_arrow.left() + angleString;
break;
case ja_routing_type.TURN_RIGHT:
angleString = angleString + ja_arrow.right();
break;
case ja_routing_type.EXIT:
case ja_routing_type.KEEP:
angleString = a > 0 ? ja_arrow.left_up() + angleString : angleString + ja_arrow.right_up();
break;
case ja_routing_type.EXIT_LEFT:
case ja_routing_type.KEEP_LEFT:
angleString = ja_arrow.left_up() + angleString;
break;
case ja_routing_type.EXIT_RIGHT:
case ja_routing_type.KEEP_RIGHT:
angleString += ja_arrow.right_up();
break;
//Override
case ja_routing_type.OverrideBC:
angleString = ja_getOption("overrideAngles") ? angleString : "";
break;
case ja_routing_type.OverrideCONTINUE:
angleString = ja_arrow.up() + (ja_getOption("overrideAngles") ? angleString : "");
break;
case ja_routing_type.OverrideTURN_LEFT:
angleString = ja_arrow.left() + (ja_getOption("overrideAngles") ? angleString : "");
break;
case ja_routing_type.OverrideTURN_RIGHT:
angleString = (ja_getOption("overrideAngles") ? angleString : "") + ja_arrow.right();
break;
case ja_routing_type.OverrideEXIT_LEFT:
case ja_routing_type.OverrideKEEP_LEFT:
angleString = ja_arrow.left_up() + (ja_getOption("overrideAngles") ? angleString : "");
break;
case ja_routing_type.OverrideEXIT_RIGHT:
case ja_routing_type.OverrideKEEP_RIGHT:
angleString = (ja_getOption("overrideAngles") ? angleString : "") + ja_arrow.right_up();
default:
ja_log("No extra format for junction type: " + ja_junction_type, 2);
}
} else {
switch(ja_junction_type) {
case ja_routing_type.TURN:
angleString = (a > 0 ? ja_arrow.left() : ja_arrow.right()) + "\n" + angleString;
break;
case ja_routing_type.TURN_LEFT:
angleString = ja_arrow.left() + "\n" + angleString;
break;
case ja_routing_type.TURN_RIGHT:
angleString = ja_arrow.right() + "\n" + angleString;
break;
case ja_routing_type.EXIT:
case ja_routing_type.KEEP:
angleString = (a > 0 ? ja_arrow.left_up() : ja_arrow.right_up()) + "\n" + angleString;
break;
case ja_routing_type.EXIT_LEFT:
case ja_routing_type.KEEP_LEFT:
angleString = ja_arrow.left_up() + "\n" + angleString;
break;
case ja_routing_type.EXIT_RIGHT:
case ja_routing_type.KEEP_RIGHT:
angleString = ja_arrow.right_up() + "\n" + angleString;
break;
case ja_routing_type.PROBLEM:
angleString = "?\n" + angleString;
break;
//Override
case ja_routing_type.OverrideBC:
angleString = ja_getOption("overrideAngles") ? angleString : "";
break;
case ja_routing_type.OverrideCONTINUE:
angleString = ja_arrow.up() + (ja_getOption("overrideAngles") ? ("\n" + angleString) : "");
break;
case ja_routing_type.OverrideTURN_LEFT:
angleString = ja_arrow.left() + (ja_getOption("overrideAngles") ? ("\n" + angleString) : "");
break;
case ja_routing_type.OverrideTURN_RIGHT:
angleString = ja_arrow.right() + (ja_getOption("overrideAngles") ? ("\n" + angleString) : "");
break;
case ja_routing_type.OverrideEXIT_LEFT:
case ja_routing_type.OverrideKEEP_LEFT:
angleString = ja_arrow.left_up() + (ja_getOption("overrideAngles") ? ("\n" + angleString) : "");
break;
case ja_routing_type.OverrideEXIT_RIGHT:
case ja_routing_type.OverrideKEEP_RIGHT:
angleString = ja_arrow.right_up() + (ja_getOption("overrideAngles") ? ("\n" + angleString) : "");
break;
default:
ja_log("No extra format for junction type: " + ja_junction_type, 2);
}
}
var anglePoint = withRouting ?
new window.OpenLayers.Feature.Vector(
point,
{ angle: angleString, ja_type: ja_junction_type }
): new window.OpenLayers.Feature.Vector(
point,
{ angle: ja_round(a) + "°", ja_type: "generic" }
);
ja_log(anglePoint, 3);
//Don't paint points inside an overlaid roundabout
if(ja_roundabout_points.some(function (roundaboutPoint){
return roundaboutPoint.containsPoint(point);
})) {
return;
}
//Draw a line to the point
ja_mapLayer.addFeatures([
new window.OpenLayers.Feature.Vector(
new window.OpenLayers.Geometry.LineString([node.getOLGeometry(), point]),
{},
{strokeOpacity: 0.6, strokeWidth: 1.2, strokeDashstyle: "solid", strokeColor: "#ff9966"}
)
]
);
//push the angle point
ja_mapLayer.addFeatures([anglePoint]);
}
function ja_draw_roundabout_overlay(junctionId) {
(junctionId === undefined ? (window.W.model.junctions.getObjectArray()) : (function (junction) {
return junction === undefined ? [] : [ junction ];
})
(getByID(window.W.model.junctions,junctionId))).forEach(function (element) {
ja_log(element, 3);
var nodes = {};
element.attributes.segIDs.forEach(function(s) {
var seg = getByID(window.W.model.segments,s);
ja_log(seg, 3);
nodes[seg.attributes.fromNodeID] = getByID(window.W.model.nodes,seg.attributes.fromNodeID);
nodes[seg.attributes.toNodeID] = getByID(window.W.model.nodes,seg.attributes.toNodeID);
});
ja_log(nodes, 3);
var center = ja_coordinates_to_point([element.getOLGeometry().x, element.getOLGeometry().y]);
ja_log(center, 3);
var distances = [];
Object.getOwnPropertyNames(nodes).forEach(function(name) {
ja_log("Checking " + name + " distance", 3);
var dist = Math.sqrt(
Math.pow(nodes[name].getOLGeometry().x - center.x, 2) +
Math.pow(nodes[name].getOLGeometry().y - center.y, 2)
);
distances.push(dist);
});
ja_log(distances, 3);
ja_log("Mean distance is " + distances.reduce(function(a,b){return a + b;}) / distances.length, 3);
var circle = window.OpenLayers.Geometry.Polygon.createRegularPolygon(
center,
distances.reduce(function(a,b){return a + b;}) / distances.length,
40,
0
);
var roundaboutCircle = new window.OpenLayers.Feature.Vector(circle, {'ja_type': 'roundaboutOverlay'});
ja_roundabout_points.push(circle);
ja_mapLayer.addFeatures([roundaboutCircle]);
});
}
/*
* Segment and routing helpers
*/
/**
* Check if segment in type matches any other segments
* @param segment_in
* @param segments
* @returns {boolean}
*/
function ja_segment_type_match(segment_in, segments) {
ja_log(segment_in, 2);
ja_log(segments, 2);
return Object.getOwnPropertyNames(segments).some(function (segment_n_id, index) {
var segment_n = segments[segment_n_id];
ja_log("PT Checking element " + index, 2);
ja_log(segment_n, 2);
if(segment_n.attributes.id === segment_in.attributes.id) { return false; }
ja_log("PT checking sn.rt " + segment_n.attributes.roadType +
" vs i.pt: " + segment_in.attributes.roadType, 2);
return (segment_n.attributes.roadType === segment_in.attributes.roadType);
});
}
function ja_is_primary_road(seg) {
var t = seg.attributes.roadType;
return t === ja_road_type.FREEWAY || t === ja_road_type.MAJOR_HIGHWAY || t === ja_road_type.MINOR_HIGHWAY;
}
function ja_is_up_to_primary_road(seg) {
var t = seg.attributes.roadType;
return t === ja_road_type.FREEWAY || t === ja_road_type.RAMP || t === ja_road_type.MAJOR_HIGHWAY || t === ja_road_type.MINOR_HIGHWAY || t === ja_road_type.PRIMARY_STREET;
}
function ja_is_ramp(seg) {
var t = seg.attributes.roadType;
return t === ja_road_type.RAMP;
}
function ja_is_turn_allowed(s_from, via_node, s_to) {
ja_log("Allow from " + s_from.attributes.id +
" to " + s_to.attributes.id +
" via " + via_node.attributes.id + "? " +
via_node.isTurnAllowedBySegDirections(s_from, s_to) + " | " + s_from.isTurnAllowed(s_to, via_node), 2);
//Is there a driving direction restriction?
if(!via_node.isTurnAllowedBySegDirections(s_from, s_to)) {
ja_log("Driving direction restriction applies", 3);
return false;
}
//Is turn allowed by other means (e.g. turn restrictions)?
if(!s_from.isTurnAllowed(s_to, via_node)) {
ja_log("Other restriction applies", 3);
return false;
}
if(s_to.attributes.fromNodeID === via_node.attributes.id) {
ja_log("FWD direction",3);
return ja_is_car_allowed_by_restrictions(s_to.attributes.fwdRestrictions);
} else {
ja_log("REV direction",3);
return ja_is_car_allowed_by_restrictions(s_to.attributes.revRestrictions);
}
}
function ja_is_car_allowed_by_restrictions(restrictions) {
ja_log("Checking restrictions for cars", 2);
if(typeof restrictions === 'undefined' || restrictions == null || restrictions.length === 0) {
ja_log("No car type restrictions to check...", 3);
return true;
}
ja_log(restrictions, 3);
return !restrictions.some(function(element) {
/*jshint bitwise: false*/
ja_log("Checking restriction " + element, 3);
//noinspection JSBitwiseOperatorUsage
var ret = element.allDay && //All day restriction
element.days === 127 && //Every week day
( element.vehicleTypes === -1 || //All vehicle types
element.vehicleTypes & ja_vehicle_types.PRIVATE //or at least private cars
);
if (ret) {
ja_log("There is an all-day-all-week restriction", 3);
var fromDate = Date.parse(element.fromDate);
var toDate = Date.parse(element.toDate);
ja_log("From: " + fromDate + ", to: " + toDate + ". " + ret, 3);
if(isNaN(fromDate && isNaN(toDate))) {
ja_log("No start nor end date defined");
return false;
}
var fRes, tRes;
if(!isNaN(fromDate) && new Date() > fromDate) {
ja_log("From date is in the past", 3);
fRes = 2;
} else if(isNaN(fromDate)) {
ja_log("From date is invalid/not set", 3);
fRes = 1;
} else {
ja_log("From date is in the future: " + fromDate, 3);
fRes = 0;
}
if(!isNaN(toDate) && new Date() < toDate) {
ja_log("To date is in the future", 3);
tRes = 2;
} else if(isNaN(toDate)) {
ja_log("To date is invalid/not set", 3);
tRes = 1;
} else {
ja_log("To date is in the past: " + toDate, 3);
tRes = 0;
}
// Car allowed unless
// - toDate is in the future and fromDate is unset or in the past
// - fromDate is in the past and toDate is unset in the future
// Hope I got this right ;)
return (fRes <= 1 && tRes <= 1);
}
return ret;
});
}
/**
* From wiki:
* A Cross-match is when the primary name of one segment is identical to the alternate name of an adjacent segment.
* It had the same priory as a Primary name match. In order for a Cross match to work there must be at least one
* alt name on both involved segments (even though they don't necessarily match each other). It will work even if
* the are no Primary names on those segments. It will not work if all three segments at a split have a matching
* Primary name or a matching Alternate name.
* @param street_in
* @param streets
* @returns {boolean}
*/
function ja_cross_name_match(street_in, streets) {
ja_log("CN: init", 2);
ja_log(street_in, 2);
ja_log(streets, 2);
return Object.getOwnPropertyNames(streets).some(function (street_n_id, index) {
var street_n_element = streets[street_n_id];
ja_log("CN: Checking element " + index, 2);
ja_log(street_n_element, 2);
return (street_in.secondary.some(function (street_in_secondary){
ja_log("CN2a: checking n.p: " + street_n_element.primary.attributes.name +
" vs in.s: " + street_in_secondary.attributes.name, 2);
//wlodek76: CROSS-MATCH works when two compared segments contain at least one ALT NAME
//when alt name is empty cross-match does not work
//FZ69617: This no longer seems to be needed
//if (street_n_element.secondary.length === 0) { return false; }
return street_n_element.primary.attributes.name === street_in_secondary.attributes.name;
}) || street_n_element.secondary.some(function (street_n_secondary) {
ja_log("CN2b: checking in.p: " + street_in.primary.attributes.name + " vs n.s: " + street_n_secondary.attributes.name, 2);
//wlodek76: CROSS-MATCH works when two compared segments contain at least one ALT NAME
//when alt name is empty cross-match does not work
//FZ69617: This no longer seems to be needed
//if (street_in.secondary.length === 0) { return false; }
//wlodek76: missing return from checking primary name with alternate names
return street_in.primary.attributes.name === street_n_secondary.attributes.name;
}));
});
}
function ja_alt_name_match(street_in, streets) {
return Object.getOwnPropertyNames(streets).some(function (street_n_id, index) {
var street_n_element = streets[street_n_id];
ja_log("AN alt name check: Checking element " + index, 2);
ja_log(street_n_element, 2);
if(street_in.secondary.length === 0) { return false; }
if(street_n_element.secondary.length === 0) { return false; }
return street_in.secondary.some(function (street_in_secondary, index2) {
ja_log("AN2 checking element " + index2, 2);
ja_log(street_in_secondary, 2);
return street_n_element.secondary.some(function (street_n_secondary_element, index3) {
ja_log("AN3 Checking in.s: " + street_in_secondary.attributes.name +
" vs n.s." + index3 + ": " + street_n_secondary_element.attributes.name, 2);
return street_in_secondary.attributes.name === street_n_secondary_element.attributes.name;
});
});
});
}
function ja_primary_name_match(street_in, streets) {
ja_log("PN", 2);
ja_log(street_in, 2);
ja_log(streets, 2);
return Object.getOwnPropertyNames(streets).some(function (id, index, array) {
var element = streets[id];
ja_log("PN Checking element " + index + " of " + array.length, 2);
ja_log(element, 2);
return (element.primary.attributes.name === street_in.primary.attributes.name);
});
}
function ja_get_streets(segmentId) {
var primary =
window.W.model.streets.objects[window.W.model.segments.objects[segmentId].attributes.primaryStreetID];
var secondary = [];
window.W.model.segments.objects[segmentId].attributes.streetIDs.forEach(function (element) {
secondary.push(window.W.model.streets.objects[element]);
});
ja_log(primary, 3);
ja_log(secondary, 3);
return { primary: primary, secondary: secondary };
}
/**
* Computes segment's length in meters
* @param segment Segment to compute the length of
* @returns {number}
*/
function ja_segment_length(segment) {
var len = segment.getOLGeometry().getGeodesicLength(window.W.map.olMap.projection);
ja_log("segment: " + segment.attributes.id
+ " computed len: " + len + " attrs len: " + segment.attributes.length, 3);
return len;
}
/**
* Checks whether the two segments (connected at the same node) overlap each other.
* @param a1 Angle of the 1st segment
* @param a2 Angle of the 2nd segment
*/
function ja_overlapping_angles(a1, a2) {
// If two angles are close < 2 degree they are overlapped.
// Method of recognizing overlapped segment by server is unknown for me yet, I took this from WME Validator
// information about this.
// TODO: verify overlapping check on the side of routing server.
return Math.abs(ja_angle_diff(a1, a2, true)) < OVERLAPPING_ANGLE;
}
/*
* Misc math and map element functions
*/
/**
*
* @param p0 From point
* @param p1 Center point
* @param p2 To point
* @returns {number}
*/
function ja_angle_between_points(p0,p1,p2) {
ja_log("p0 " + p0,3);
ja_log("p1 " + p1,3);
ja_log("p2 " + p2,3);
var a = Math.pow(p1.x-p0.x,2) + Math.pow(p1.y-p0.y,2);
var b = Math.pow(p1.x-p2.x,2) + Math.pow(p1.y-p2.y,2);
var c = Math.pow(p2.x-p0.x,2) + Math.pow(p2.y-p0.y,2);
var angle = Math.acos((a+b-c) / Math.sqrt(4*a*b)) / (Math.PI / 180);
ja_log("angle is " + angle,3);
return angle;
}
/**
* get absolute (or turn) angle between 2 inputs.
* 0,90,true -> 90 0,90,false -> -90
* 0,170,true -> 170 0,170,false -> -10
* @param aIn absolute s_in angle (from node)
* @param aOut absolute s_out angle (from node)
* @param absolute return absolute or turn angle?
* @returns {number}
*/
function ja_angle_diff(aIn, aOut, absolute) {
var a = parseFloat(aOut) - parseFloat(aIn);
if(a > 180) { a -= 360; }
if(a < -180) { a+= 360; }
return absolute ? a : (a > 0 ? a - 180 : a + 180);
}
function ja_angle_dist(a, s_in_angle) {
ja_log("Computing out-angle " + a + " distance to in-angle " + s_in_angle, 4);
var diff = ja_angle_diff(a, s_in_angle, true);
ja_log("Diff is " + diff + ", returning: " + (diff < 0 ? diff + 360 : diff), 4);
return diff < 0 ? diff + 360 : diff;
}
function ja_is_roundabout_normal(junctionID, n_in) {
ja_log("Check normal roundabout", 3);
var junction = getByID(window.W.model.junctions,junctionID);
var nodes = {};
var numValidExits = 0;
junction.attributes.segIDs.forEach(function (element, index) {
var s = getByID(window.W.model.segments,element);
ja_log("index: " + index, 3);
//ja_log(s, 3);
if (!nodes.hasOwnProperty(s.attributes.toNodeID)) {
ja_log("Adding node id: " + s.attributes.toNodeID, 3);
//Check if node has allowed exits
var allowed = false;
var currNode = getByID(window.W.model.nodes,s.attributes.toNodeID);
ja_log(currNode, 3);
currNode.attributes.segIDs.forEach(function (element2) {
var s_exit = getByID(window.W.model.segments,element2);
ja_log(s_exit, 3);
if (s_exit.attributes.junctionID === null) {
ja_log("Checking: " + s_exit.attributes.id, 3);
if (currNode.isTurnAllowedBySegDirections(s, s_exit)) {
//Exit possibly allowed
ja_log("Exit allowed", 3);
allowed = true;
} else {
ja_log("Exit not allowed", 3);
}
} else {
//part of the junction.. Ignoring
ja_log(s_exit.attributes.id + " is in the roundabout. ignoring", 3);
}
});
if (allowed) {
numValidExits++;
nodes[s.attributes.toNodeID] = getByID(window.W.model.nodes,s.attributes.toNodeID);
}
}
});
var is_normal = true;
ja_log(n_in, 3);
ja_log(junction, 3);
ja_log(nodes, 3);
//If we have more than 4 possible exits, the roundabout is non-normal, and we don't want to paint the
//offending angles.
if (numValidExits > 4) { return false; }
for (var n in nodes) {
if (nodes.hasOwnProperty(n)) {
ja_log("Checking " + n, 3);
if (String(n) === String(n_in)) {
ja_log("Not comparing to n_in ;)", 3);
} else {
var angle = ja_angle_between_points(
getByID(window.W.model.nodes,n_in).geometry,
ja_coordinates_to_point([junction.getOLGeometry().x, junction.getOLGeometry().y]),
getByID(window.W.model.nodes,n).geometry
);
ja_log("Angle is: " + angle, 3);
ja_log("Normalized angle is: " + (angle % 90), 3);
//angle = Math.abs((angle%90 - 90))
angle = Math.abs((angle % 90));
ja_log("Angle is: " + angle, 3);
// 90 +/- 15 is considered "normal"
if (angle <= 15 || 90 - angle <= 15) {
ja_log("turn is normal", 3);
} else {
ja_log("turn is NOT normal", 3);
is_normal = false;
//Push a marker on the node to show which exit is "not normal"
ja_mapLayer.addFeatures([
new window.OpenLayers.Feature.Vector(
getByID(window.W.model.nodes,n).geometry,
{
angle: '±' + ja_round(Math.min(angle, 90 - angle)),
ja_type: ja_routing_type.ROUNDABOUT
}
)]
);
}
}
}
}
return is_normal;
}
/**
* Helper to get get correct projections for roundabout center point
*/
function ja_coordinates_to_point(coordinates) {
return new window.OpenLayers.Geometry.Point(
coordinates[0],
coordinates[1]
)
}
function getOLFeatureGeometryFromSegment(segment) {
const feature = W.map.segmentLayer.features.find((feat) => feat.attributes.wazeFeature.id === segment.attributes.id);
return feature.geometry;
}
function ja_get_first_point(segment) {
return getOLFeatureGeometryFromSegment(segment).components[0];
// return segment.getOLGeometry().components[0];
}
function ja_get_last_point(segment) {
return getOLFeatureGeometryFromSegment(segment).components.at(-1);
// return segment.getOLGeometry().components[segment.getOLGeometry().components.length - 1];
}
function ja_get_second_point(segment) {
return getOLFeatureGeometryFromSegment(segment).components[1];
// return segment.getOLGeometry().components[1];
}
function ja_get_next_to_last_point(segment) {
return getOLFeatureGeometryFromSegment(segment).components.at(-2);
// return segment.getOLGeometry().components[segment.getOLGeometry().components.length - 2];
}
//get the absolute angle for a segment end point
function ja_getAngle(ja_node, ja_segment) {
ja_log("node: " + ja_node, 2);
ja_log("segment: " + ja_segment, 2);
if (ja_node == null || ja_segment == null) { return null; }
var ja_dx, ja_dy;
if (ja_segment.attributes.fromNodeID === ja_node) {
ja_dx = ja_get_second_point(ja_segment).x - ja_get_first_point(ja_segment).x;
ja_dy = ja_get_second_point(ja_segment).y - ja_get_first_point(ja_segment).y;
} else {
ja_dx = ja_get_next_to_last_point(ja_segment).x - ja_get_last_point(ja_segment).x;
ja_dy = ja_get_next_to_last_point(ja_segment).y - ja_get_last_point(ja_segment).y;
}
ja_log(ja_node + " / " + ja_segment + ": dx:" + ja_dx + ", dy:" + ja_dy, 2);
var ja_angle = Math.atan2(ja_dy, ja_dx);
return ((ja_angle * 180 / Math.PI)) % 360;
}
//get the absolute angle for a midle segment (to prevent a false positive on the curved segment)
function ja_getAngleMidleSeg(ja_node, ja_segment) {
ja_log("node: " + ja_node, 2);
ja_log("segment: " + ja_segment, 2);
if (ja_node == null || ja_segment == null) { return null; }
var ja_dx, ja_dy;
if (ja_segment.attributes.fromNodeID === ja_node) {
ja_dx = ja_get_last_point(ja_segment).x - ja_get_first_point(ja_segment).x;
ja_dy = ja_get_last_point(ja_segment).y - ja_get_first_point(ja_segment).y;
} else {
ja_dx = ja_get_first_point(ja_segment).x - ja_get_last_point(ja_segment).x;
ja_dy = ja_get_first_point(ja_segment).y - ja_get_last_point(ja_segment).y;
}
ja_log(ja_node + " / " + ja_segment + ": dx:" + ja_dx + ", dy:" + ja_dy, 2);
var ja_angle = Math.atan2(ja_dy, ja_dx);
return ((ja_angle * 180 / Math.PI)) % 360;
}
/**
* Decimal adjustment of a number. Borrowed (with some modifications) from
* https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Math/round
* ja_round(55.55); with 1 decimal // 55.6
* ja_round(55.549); with 1 decimal // 55.5
* ja_round(55); with -1 decimals // 60
* ja_round(54.9); with -1 decimals // 50
*
* @param {Number} value The number.
* @returns {Number} The adjusted value.
*/
function ja_round(value) {
var ja_rounding = -parseInt(ja_getOption("decimals"));
var valueArray;
if (typeof ja_rounding === 'undefined' || +ja_rounding === 0) {
return Math.round(value);
}
value = +value;
// If the value is not a number or the exp is not an integer...
if (isNaN(value) || !(typeof ja_rounding === 'number' && ja_rounding % 1 === 0)) {
return NaN;
}
// Shift
valueArray = value.toString().split('e');
value = Math.round(+(valueArray[0] + 'e' + (valueArray[1] ? (+valueArray[1] - ja_rounding) : -ja_rounding)));
// Shift back
valueArray = value.toString().split('e');
return +(valueArray[0] + 'e' + (valueArray[1] ? (+valueArray[1] + ja_rounding) : ja_rounding));
}
/*
* WME interface helper functions
*/
function ja_getOption(name) {
ja_log("Loading option: " + name, 2);
if(!ja_options.hasOwnProperty(name) || typeof ja_options[name] === 'undefined') {
ja_options[name] = ja_settings[name].defaultValue;
}
//Check for invalid values
//Select values
if(ja_settings[name].elementType === "select" && ja_settings[name].options.lastIndexOf(ja_options[name]) < 0) {
ja_log(ja_settings[name].options, 2);
ja_log("Found invalid value for setting " + name + ": " + ja_options[name] + ". Using default.", 2);
ja_options[name] = ja_settings[name].defaultValue;
}
//Color values
else if(ja_settings[name].elementType === "color" && String(ja_options[name]).match(/#[0-9a-f]{6}/) == null) {
ja_log("Found invalid value for setting " + name + ": \"" + ja_options[name] + "\". Using default.", 2);
ja_options[name] = ja_settings[name].defaultValue;
}
//Numeric values
else if(ja_settings[name].elementType === "number") {
var minValue = typeof ja_settings[name].min === 'undefined' ? Number.MIN_VALUE : ja_settings[name].min;
var maxValue = typeof ja_settings[name].max === 'undefined' ? Number.MAX_VALUE : ja_settings[name].max;
if(isNaN(ja_options[name]) || ja_options[name] < minValue || ja_options[name] > maxValue) {
ja_log("Found invalid value for setting " + name + ": \"" + ja_options[name] + "\". Using default.", 2);
ja_options[name] = ja_settings[name].defaultValue;
}
}
//Checkboxes
else if(ja_settings[name].elementType === "checkbox" && ja_options[name] !== true && ja_options[name] !== false) {
ja_log("Found invalid value for setting " + name + ": \"" + ja_options[name] + "\". Using default.", 2);
ja_options[name] = ja_settings[name].defaultValue;
}
ja_log("Got value: " + ja_options[name], 2);
return ja_options[name];
}
function ja_setOption(name, val) {
ja_options[name] = val;
if(localStorage) {
localStorage.setItem("wme_ja_options", JSON.stringify(ja_options));
}
ja_log(ja_options,3);
}
var ja_onchange = function(e) {
var applyPending = false;
var settingName = Object.getOwnPropertyNames(ja_settings).filter(function(a){
ja_log(ja_settings[a], 4);
return ja_settings[a].elementId === e.id;
})[0];
ja_log(e, 3);
ja_log(settingName, 3);
switch(ja_settings[settingName].elementType) {
case "checkbox":
ja_log("Checkbox setting " + e.id + ": stored value is: " + ja_options[settingName] + ", new value: " + e.checked, 3);
if (ja_options[settingName] !== e.checked) { applyPending = true; }
break;
case "select":
case "color":
case "number":
ja_log("Setting " + e.id + ": stored value is: " + ja_options[settingName] + ", new value: " + e.value, 3);
if (String(ja_options[settingName]) !== String(e.value)) { applyPending = true; }
break;
default:
ja_log("Unknown setting " + e.id + ": stored value is: " + ja_options[settingName] + ", new value: " + e.value, 3);
}
function disable_input(element, disable) {
element.disabled = disable;
if (disable) {
$(element.parentNode).addClass("disabled");
} else {
$(element.parentNode).removeClass("disabled");
}
}
//Enable|disable certain dependent settings
switch(e.id) {
case ja_settings.override.elementId:
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
if(setting.group && setting.group === 'override') {
ja_log(a + ": " + !e.checked , 3);
disable_input(document.getElementById(setting.elementId), (!e.checked || e.disabled) );
}
});
break;
case ja_settings.guess.elementId:
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
if(setting.group && (setting.group === 'guess' || setting.group === 'override')) {
ja_log(a + ": " + !e.checked , 3);
disable_input(document.getElementById(setting.elementId), !e.checked);
}
});
break;
case ja_settings.roundaboutOverlayDisplay.elementId:
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
if(setting.group && setting.group === 'roundaboutOverlayDisplay') {
ja_log(a +": " + e.value, 3);
disable_input(document.getElementById(setting.elementId), e.value === "rOverNever");
}
});
break;
default:
ja_log("Nothing to do for " + e.id, 2);
}
ja_log("Apply pending configuration changes? " + applyPending, 2);
if(applyPending) {
ja_log("Applying new settings now", 3);
setTimeout(function(){ja_save();}, 500);
} else {
ja_log("No new settings to apply", 3);
}
};
var ja_load = function loadJAOptions() {
ja_log("Should load settings now.", 2);
if(localStorage != null) {
ja_log("We have local storage! =)",2);
try {
ja_options = JSON.parse(localStorage.getItem("wme_ja_options"));
} catch (e){
ja_log("Loading settings failed.. " + e.message, 2);
ja_options = null;
}
}
if(ja_options == null) {
ja_reset();
} else {
ja_log(ja_options, 2);
setTimeout(function(){ja_apply();}, 500);
}
};
var ja_save = function saveJAOptions() {
ja_log("Saving settings", 2);
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
ja_log(setting, 2);
switch (setting.elementType) {
case "checkbox":
ja_setOption(a, document.getElementById(setting.elementId).checked);
break;
case "color":
var re = /^#[0-9a-f]{6}$/;
if(re.test(document.getElementById(setting.elementId).value)) {
ja_setOption(a, document.getElementById(setting.elementId).value);
} else {
ja_setOption(a, ja_settings[a]['default']);
}
break;
case "number":
var val = parseInt(document.getElementById(setting.elementId).value);
if(!isNaN(val) && val === parseInt(val) && setting.min <= val && val <= setting.max) {
ja_setOption(a, document.getElementById(setting.elementId).value);
} else {
ja_setOption(a, ja_settings[a]['default']);
}
break;
case "text":
case "select":
ja_setOption(a, document.getElementById(setting.elementId).value);
break;
default:
ja_log("Unknown setting type " + setting.elementType, 2);
}
});
ja_apply();
return false;
};
var ja_apply = function applyJAOptions() {
ja_log("Applying stored (or default) settings", 2);
if(typeof window.W.map.getLayersBy("uniqueName","junction_angles")[0] === 'undefined') {
ja_log("WME not ready yet, trying again in 400 ms", 2);
setTimeout(function(){ja_apply();}, 400);
return;
}
if (document.getElementById("sidepanel-ja") == null) {
ja_log("WME not ready (no settings tab)", 2);
} else {
ja_log(Object.getOwnPropertyNames(ja_settings), 2);
Object.getOwnPropertyNames(ja_settings).forEach(function (a) {
var setting = ja_settings[a];
ja_log(a, 2);
ja_log(setting, 2);
ja_log(document.getElementById(setting.elementId), 2);
switch (setting.elementType) {
case "checkbox":
document.getElementById(setting.elementId).checked = ja_getOption(a);
document.getElementById(setting.elementId).onchange(null);
break;
case "color":
case "number":
case "text":
document.getElementById(setting.elementId).value = ja_getOption(a);
break;
case "select":
document.getElementById(setting.elementId).value = ja_getOption(a);
document.getElementById(setting.elementId).onchange(null);
break;
default:
ja_log("Unknown setting type " + setting.elementType, 2);
}
});
}
window.W.map.getLayersBy("uniqueName","junction_angles")[0].styleMap = ja_style();
ja_calculate_real();
ja_log(ja_options, 2);
};
var ja_reset = function resetJAOptions() {
ja_log("Resetting settings", 2);
if(localStorage != null) {
localStorage.removeItem("wme_ja_options");
}
ja_options = {};
ja_apply();
return false;
};
function ja_helpLink(url, text) {
var elem = document.createElement('li');
var l = document.createElement('a');
l.href = url;
l.target = "_blank";
l.appendChild(document.createTextNode(ja_getMessage(text)));
elem.appendChild(l);
return elem;
}
var ja_calculation_timer = {
start: function() {
ja_log("Starting timer", 2);
this.cancel();
var ja_calculation_timer_self = this;
this.timeoutID = window.setTimeout(function(){ja_calculation_timer_self.calculate();}, 200);
},
calculate: function() {
ja_calculate_real();
delete this.timeoutID;
},
cancel: function() {
if(typeof this.timeoutID === "number") {
window.clearTimeout(this.timeoutID);
ja_log("Cleared timeout ID : " + this.timeoutID, 2);
delete this.timeoutID;
}
}
};
function ja_calculate() {
ja_calculation_timer.start();
}
function ja_get_contrast_color(hex_color) {
ja_log("Parsing YIQ-based contrast color for: " + hex_color + " ...", 2);
var r = parseInt(hex_color.substr(1, 2), 16);
var g = parseInt(hex_color.substr(3, 2), 16);
var b = parseInt(hex_color.substr(5, 2), 16);
var yiq = ((r * 299) + (g * 587) + (b * 114)) / 1000;
return (yiq >= 128) ? 'black' : 'white';
}
function ja_get_style_rule(routingType, fillColorOption) {
return new window.OpenLayers.Rule(
{
filter: new window.OpenLayers.Filter.Comparison({
type: window.OpenLayers.Filter.Comparison.EQUAL_TO,
property: "ja_type",
value: routingType
}),
symbolizer: {
pointRadius: 3 + parseInt(ja_getOption("pointSize"), 10) +
(parseInt(ja_getOption("decimals")) > 0 ? 4 * parseInt(ja_getOption("decimals")) : 0),
fontSize: (parseInt(ja_getOption("pointSize")) - 1) + "px",
fillColor: ja_getOption(fillColorOption),
strokeColor: "#183800",
fontColor: ja_get_contrast_color(ja_getOption(fillColorOption))
}
});
}
function ja_get_styleOverride_rule(routingType, fillColorOption) {
return new window.OpenLayers.Rule(
{
filter: new window.OpenLayers.Filter.Comparison({
type: window.OpenLayers.Filter.Comparison.EQUAL_TO,
property: "ja_type",
value: routingType
}),
symbolizer: {
pointRadius: 2+ parseInt(ja_getOption("pointSize"), 10) +
(parseInt(ja_getOption("decimals")) > 0 ? 4 * parseInt(ja_getOption("decimals")) : 0),
fontSize: (parseInt(ja_getOption("pointSize")) + (ja_getOption("overrideAngles") ? (-1) : 8)) + "px",
fillColor: ja_getOption(fillColorOption),
strokeColor: "#F68F23", //183800
strokeWidth: 5,
fontColor: ja_get_contrast_color(ja_getOption(fillColorOption))
}
});
}
function ja_style() {
ja_log("Point radius will be: " + (parseInt(ja_getOption("pointSize"), 10)) +
(parseInt(ja_getOption("decimals") > 0 ? (4 * parseInt(ja_getOption("decimals"))).toString() : "0")), 2);
return new window.OpenLayers.Style({
fillColor: "#ffcc88",
strokeColor: "#ff9966",
strokeWidth: 2,
label: "${angle}",
fontWeight: "bold",
pointRadius: parseInt(ja_getOption("pointSize"), 10) +
(parseInt(ja_getOption("decimals")) > 0 ? 4 * parseInt(ja_getOption("decimals")) : 0),
fontSize: "10px"
}, {
rules: [
new window.OpenLayers.Rule({
symbolizer: {
}
}),
ja_get_style_rule(ja_routing_type.TURN, "turnInstructionColor"),
ja_get_style_rule(ja_routing_type.TURN_LEFT, "turnInstructionColor"),
ja_get_style_rule(ja_routing_type.TURN_RIGHT, "turnInstructionColor"),
ja_get_style_rule(ja_routing_type.BC, "noInstructionColor"),
ja_get_style_rule(ja_routing_type.KEEP, "keepInstructionColor"),
ja_get_style_rule(ja_routing_type.KEEP_LEFT, "keepInstructionColor"),
ja_get_style_rule(ja_routing_type.KEEP_RIGHT, "keepInstructionColor"),
ja_get_style_rule(ja_routing_type.EXIT, "exitInstructionColor"),
ja_get_style_rule(ja_routing_type.EXIT_LEFT, "exitInstructionColor"),
ja_get_style_rule(ja_routing_type.EXIT_RIGHT, "exitInstructionColor"),
ja_get_style_rule(ja_routing_type.NO_TURN, "noTurnColor"),
ja_get_style_rule(ja_routing_type.PROBLEM, "problemColor"),
ja_get_style_rule(ja_routing_type.ROUNDABOUT, "roundaboutColor"),
ja_get_style_rule(ja_routing_type.ROUNDABOUT_EXIT, "exitInstructionColor"),
ja_get_style_rule(ja_routing_type.U_TURN, "uTurnInstructionColor"),
ja_get_style_rule(ja_routing_type.NO_U_TURN, "problemColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideTURN_LEFT, "turnInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideTURN_RIGHT, "turnInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideBC, "noInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideCONTINUE, "continueInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideKEEP_LEFT, "keepInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideKEEP_RIGHT, "keepInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideEXIT, "exitInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideEXIT_LEFT, "exitInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideEXIT_RIGHT, "exitInstructionColor"),
ja_get_styleOverride_rule(ja_routing_type.OverrideU_TURN, "uTurnInstructionColor"),
new window.OpenLayers.Rule(
{
filter: new window.OpenLayers.Filter.Comparison({
type: window.OpenLayers.Filter.Comparison.EQUAL_TO,
property: "ja_type",
value: "roundaboutOverlay"
}),
symbolizer: {
pointRadius: 3 + parseInt(ja_getOption("pointSize"), 10) +
(parseInt(ja_getOption("decimals")) > 0 ? 4 * parseInt(ja_getOption("decimals")) : 0),
fontSize: "12px",
fillColor: ja_getOption("roundaboutOverlayColor"),
fillOpacity: 0.1,
strokeColor: ja_getOption("roundaboutOverlayColor"),
label: ""
}
})
]
});
}
/*
* Translation helpers
*/
function ja_getMessage(key) {
var tr = I18n.translate('ja.' + key), no_tr = I18n.missingTranslation('ja.' + key);
return tr === no_tr ? key : tr;
}
function ja_loadTranslations() {
var set_trans = function(def) {
/*jshint -W093*/
return I18n.translations[I18n.locale].ja = def;
};
ja_log("Loading translations",2);
//Apply
switch (I18n.locale) {
default:
//Default language (English)
set_trans({
name: "Junction Angle Info",
settingsTitle: "Junction Angle Info settings",
resetToDefault: "Reset to default",
defaultOn: "Show layer by default",
aAbsolute: "Absolute",
aDeparture: "Departure",
angleMode: "Angle mode",
angleDisplay: "Angle display style",
angleDisplayArrows: "Direction arrows",
displayFancy: "Fancy",
displaySimple: "Simple",
override: "Check \"override instruction\"",
overrideAngles: "Show angles of \"override instruction\"",
guess: "Estimate routing instructions",
noInstructionColor: "Color for best continuation",
continueInstructionColor: "Color for continue straight prompt",
keepInstructionColor: "Color for keep prompt",
exitInstructionColor: "Color for exit prompt",
turnInstructionColor: "Color for turn prompt",
uTurnInstructionColor: "Color for U-turn prompt",
noTurnColor: "Color for disallowed turns",
problemColor: "Color for angles to avoid",
roundaboutColor: "Color for non-normal roundabouts",
roundaboutOverlayColor: "Color for roundabout overlay",
roundaboutOverlayDisplay: "Show roundabout",
rOverNever: "Never",
rOverSelected: "When selected",
rOverAlways: "Always",
decimals: "Number of decimals",
pointSize: "Base point size",
roundaboutnav: "WIKI: Roundabouts",
ghissues: "JAI issue tracker"
});
break;
//Czech (čeština)
case 'cs':
set_trans({
name: "Junction Angle Info",
settingsTitle: "Nastavení JAI",
resetToDefault: "Výchozí nastavení",
defaultOn: "Vždy aktivní",
aAbsolute: "Absolutní",
aDeparture: "Odjezdový",
angleMode: "Styl zobrazení úhlů",
angleDisplay: "Styl výpisu úhlů",
angleDisplayArrows: "Směrové šipky",
displayFancy: "Zdobný",
displaySimple: "Jednoduchý",
override: "Zvýraznit vynucené hlasové pokyny",
overrideAngles: "Zobrazit úhly vynucených pokynů",
guess: "Odhadovat navigační hlášky",
noInstructionColor: "Bez hlášení",
continueInstructionColor: "\"Pokračujte rovně\"",
keepInstructionColor: "\"Držte se/Zůstaňte\"",
exitInstructionColor: "\"Sjeďte\"",
turnInstructionColor: "\"Odbočte\"",
uTurnInstructionColor: "\"Otočte se\"",
noTurnColor: "Nepovolené směry",
problemColor: "Nejasné úhly",
roundaboutColor: "Rozbité kruháče",
roundaboutOverlayColor: "Kruháče",
roundaboutOverlayDisplay: "ukazovat kruháče",
rOverNever: "Ne-",
rOverSelected: "Při výběru",
rOverAlways: "Vždy",
decimals: "Počet des. míst",
pointSize: "Velikost písma",
roundaboutnav: "US WIKI: Kruhové objezdy",
ghissues: "Hlášení problémů JAI"
});
break;
//Finnish (Suomen kieli)
case 'fi':
set_trans({
name: "Risteyskulmat",
settingsTitle: "Rysteyskulmien asetukset",
resetToDefault: "Palauta",
defaultOn: "Näytä taso oletuksena",
aAbsolute: "Absoluuttinen",
aDeparture: "Käännös",
angleMode: "Kulmien näyttö",
angleDisplay: "Näyttötyyli",
angleDisplayArrows: "Suuntanuolet",
displayFancy: "Nätti",
displaySimple: "Yksinkertainen",
override: "Check \"override instruction\"",
overrideAngles: "Show angles of \"override instruction\"",
guess: "Arvioi reititysohjeet",
noInstructionColor: "ohjeeton \"Suora\"-väri",
continueInstructionColor: "Color for continue straight",
keepInstructionColor: "\"Pysy vasemmalla/oikealla\"-ohjeen väri",
exitInstructionColor: "\"Poistu\"-ohjeen väri",
turnInstructionColor: "\"Käänny\"-ohjeen väri",
uTurnInstructionColor: "\"Käänny ympäri\"-ohjeen väri",
noTurnColor: "Kielletyn käännöksen väri",
problemColor: "Vältettävien kulmien väri",
roundaboutColor: "Liikenneympyrän (jolla ei-suoria kulmia) ohjeen väri",
roundaboutOverlayColor: "Liikenneympyrän korostusväri",
roundaboutOverlayDisplay: "Korosta liikenneympyrä",
rOverNever: "Ei ikinä",
rOverSelected: "Kun valittu",
rOverAlways: "Aina",
decimals: "Desimaalien määrä",
pointSize: "Ympyrän peruskoko"
});
break;
//Polish (język polski)
case 'pl':
set_trans({
settingsTitle: "Ustawienia",
resetToDefault: "Przywróć domyślne",
defaultOn: "Pokazać warstwę domyślnie",
aAbsolute: "Absolutne",
aDeparture: "Rozjazdy",
angleMode: "Tryb wyświetlania kątów",
angleDisplay: "Styl kierunków",
displayFancy: "Dwuliniowy",
displaySimple: "Prosty",
angleDisplayArrows: "Strzałki kierunków",
override: "Check \"override instruction\"",
overrideAngles: "Show angles of \"override instruction\"",
guess: "Szacuj komunikaty trasy",
noInstructionColor: "Kolor najlepszej kontynuacji",
continueInstructionColor: "Color for continue straight",
keepInstructionColor: "Kolor dla \"kieruj się\"",
exitInstructionColor: "Kolor dla \"zjedź\"",
turnInstructionColor: "Kolor dla \"skręć\"",
uTurnInstructionColor: "Kolor dla \"zawróć\"",
noTurnColor: "Kolor niedozwolonych manewrów",
problemColor: "Kolor problematycznych kątów",
roundaboutColor: "Kolor rond niestandardowych",
roundaboutOverlayColor: "Kolor znacznika rond",
roundaboutOverlayDisplay: "Pokazuj ronda",
rOverNever: "Nigdy",
rOverSelected: "Gdy zaznaczone",
rOverAlways: "Zawsze",
decimals: "Ilość cyfr po przecinku",
pointSize: "Rozmiar punktów pomiaru"
});
break;
//Russian (русский)
case 'ru':
set_trans({
name: "Углы поворотов",
settingsTitle: "Настройки Junction Angle Info",
resetToDefault: "Сбросить настройки",
defaultOn: "По умолчанию показывать",
aAbsolute: "Абсолютные",
aDeparture: "Повороты",
angleMode: "- режим углов",
angleDisplay: "- стиль отображения",
angleDisplayArrows: "- стрелки направлений",
displayFancy: "Модный",
displaySimple: "Простой",
override: "Визуализировать изменённые подсказки",
overrideAngles: "Показывать углы изменённых подсказок",
guess: "Ожидаемые подсказки",
noInstructionColor: "- нет подсказки",
continueInstructionColor: "Цвет изменённой подсказки \"продолжайте движение прямо\"",
keepInstructionColor: "- держитесь",
exitInstructionColor: "- съезд",
turnInstructionColor: "- поверните",
uTurnInstructionColor: "- развернитесь",
noTurnColor: "- запрещённый манёвр",
problemColor: "- угол следует избегать",
roundaboutColor: "- некорректное кольцо",
roundaboutOverlayColor: "- цвет кольца",
roundaboutOverlayDisplay: "- показ колец",
rOverNever: "Никогда",
rOverSelected: "Если выбрано",
rOverAlways: "Всегда",
decimals: "- знаков после запятой",
pointSize: "- размер кружка",
roundaboutnav: "Вики: круговые перекрестки",
ghissues: "Сообщить об ошибке"
});
break;
//Swedish (svenska)
case 'sv':
set_trans({
name: "Korsningsvinklar",
settingsTitle: "Inställningar för korsningsvinklar",
resetToDefault: "Återställ",
defaultOn: "Visa skiktet som standard",
aAbsolute: "Absolut",
aDeparture: "Sväng",
angleMode: "Vinkelvisning",
angleDisplay: "Vinkelstil",
angleDisplayArrows: "Riktningspilar",
displayFancy: "Grafisk",
displaySimple: "Simpel",
override: "Check \"override instruction\"",
overrideAngles: "Show angles of \"override instruction\"",
guess: "Gissa navigeringsinstruktioner",
noInstructionColor: "Färg för \"ingen instruktion\"",
continueInstructionColor: "Color for continue straight",
keepInstructionColor: "Färg för \"håll höger/vänster\"-instruktion",
exitInstructionColor: "Färg för \"ta av\"-instruktion",
turnInstructionColor: "Färg för \"sväng\"-instruktion",
uTurnInstructionColor: "Färg för \"U-sväng\"-instruktion",
noTurnColor: "Färg förbjuden sväng",
problemColor: "Färg för vinklar att undvika",
roundaboutColor: "Färg för rondell (med icke-räta vinklar)",
roundaboutOverlayColor: "Färg för rondellcirkel",
roundaboutOverlayDisplay: "Visa cirkel på rondell",
rOverNever: "Aldrig",
rOverSelected: "När vald",
rOverAlways: "Alltid",
decimals: "Decimaler",
pointSize: "Cirkelns basstorlek"
});
break;
//French (Francais)
case 'fr':
set_trans({
name: "Junction Angle Info",
settingsTitle: "Paramètres de Junction Angle Info",
defaultOn: "Activer au démarrage",
angleMode: "Mode Angle",
aAbsolute: "Absolu",
aDeparture: "Départ",
angleDisplay: "Style d'affichage d'Angles",
angleDisplayArrows: "Flèches de Direction",
displayFancy: "Fancy",
displaySimple: "Simple",
override: "Contrôler les \"overrides instruction\"",
overrideAngles: "Afficher les angles des \"overrides\" actives",
guess: "Estimer les instructions routage",
noInstructionColor: "Couleur sans instruction",
continueInstructionColor: "Couleur pour \"continuez tout droit\"",
keepInstructionColor: "Couleur pour serrez",
exitInstructionColor: "Couleur pour sortez",
turnInstructionColor: "Couleur pour tournez",
uTurnInstructionColor: "Couleur pour demi-tour",
noTurnColor: "Couleur des virages interdits",
problemColor: "Couleur des angles à éviter",
roundaboutOverlayDisplay: "Surligner les rond-point",
rOverNever: "Jamais",
rOverSelected: "Sélectionné",
rOverAlways: "Toujours",
roundaboutOverlayColor: "Couleur de surlignage rond-point",
roundaboutColor: "Couleur pour les ronds-points anormaux",
decimals: "Nombre de decimales",
pointSize: "Taille des bulles",
resetToDefault: "Réinitialiser par défaut",
roundaboutnav: "WIKI: Rond-point (en)",
ghissues: "JAI Reporter un problème"
});
break;
//Latin-American Spanish (español latinoamericano)
case 'es-419':
set_trans({
name: "Información en Ángulos de Intersección (JAI)",
settingsTitle: "Configuración de Información en Ángulos",
resetToDefault: "Limpiar configuración",
defaultOn: "Activo al iniciar",
aAbsolute: "Absoluto",
aDeparture: "Salida",
angleMode: "Modo de ángulos",
angleDisplay: "Estilo para mostrar",
angleDisplayArrows: "Flechas de dirección",
displayFancy: "Lujoso",
displaySimple: "Simple",
override: "Revisar \"instrucciones forzadas\"",
overrideAngles: "Ver ángulos en \"instrucciones forzadas\"",
guess: "Estimar instrucciones de giro",
noInstructionColor: "Sin instrucción",
continueInstructionColor: "\"Sigue derecho\"",
keepInstructionColor: "\"Mantente\"",
exitInstructionColor: "\"Sale\"",
turnInstructionColor: "\"Gira\"",
uTurnInstructionColor: "\"Gira en U\"",
noTurnColor: "Giros deshabilitados",
problemColor: "Ángulos a evitar",
roundaboutColor: "Rotondas anormales",
roundaboutOverlayColor: "Rotondas",
roundaboutOverlayDisplay: "Mostrar rotondas",
rOverNever: "Nunca",
rOverSelected: "Seleccionadas",
rOverAlways: "Siempre",
decimals: "Decimales",
pointSize: "Tamaño del texto",
roundaboutnav: "WIKI: Rotondas",
ghissues: "Seguimiento de problemas"
});
break;
//Ukrainian (український)
case 'uk':
set_trans({
name: "Junction Angle Info",
settingsTitle: "Налаштування Junction Angle Info",
resetToDefault: "Скинути налаштування",
defaultOn: "За замовчуванням показувати",
aAbsolute: "Абсолютні",
aDeparture: "Повороти",
angleMode: "- режим кутів",
angleDisplay: "- стиль відображення",
angleDisplayArrows: "- стрілки напрямків",
displayFancy: "Модний",
displaySimple: "Простий",
override: "Візуалізувати \"змінені підказки\"",
overrideAngles: "Показувати кути для \"змінених підказок\"",
guess: "Очікувані підказки:",
noInstructionColor: "- немає підказки",
continueInstructionColor: "- продовжуйте рух прямо",
keepInstructionColor: "- тримайтеся",
exitInstructionColor: "- з'їзд",
turnInstructionColor: "- поверніть",
uTurnInstructionColor: "- розверніться",
noTurnColor: "- заборонений маневр",
problemColor: "- кут слід уникати",
roundaboutColor: "- некоректне кільце",
roundaboutOverlayColor: "- колір кільця",
roundaboutOverlayDisplay: "- показ кілець",
rOverNever: "Ніколи",
rOverSelected: "Якщо вибрано",
rOverAlways: "Завжди",
decimals: "- знаків після коми",
pointSize: "- розмір шрифту",
roundaboutnav: "WIKI: кругові перехрестя(en)",
ghissues: "JAI - Повідомити про помилку"
});
break;
}
}
/*
* Bootstrapping and logging
*/
function ja_bootstrap(retries) {
retries = retries || 0;
//If Waze has not been defined in ~15 seconds, it probably won't work anyway. Might need tuning
//for really slow devices?
if (retries >= 30) {
ja_log("Failed to bootstrap 30 times. Giving up.", 0);
return;
}
try {
//User logged in and WME ready
if (
ja_is_model_ready() &&
ja_is_dom_ready() &&
window.W.loginManager.isLoggedIn()) {
setTimeout(function () {
junctionangle_init();
}, 500);
}
//Some part of the WME was not yet fully loaded. Retry.
else {
setTimeout(function () {
ja_bootstrap(++retries);
}, 500);
}
} catch (err) {
ja_log(err, 1);
setTimeout(function () {
ja_bootstrap(++retries);
}, 500);
}
}
function ja_is_model_ready() {
if(typeof window.W === 'undefined' || typeof window.W.map === 'undefined') {
return false;
} else {
//return 'undefined' !== typeof window.W.map.events.register &&
return 'undefined' !== typeof window.W.map.olMap.events.register &&
'undefined' !== typeof window.W.selectionManager.events.register &&
'undefined' !== typeof window.W.loginManager.events.register;
}
}
function ja_is_dom_ready() {
if(null === document.getElementById('user-info')) {
return false;
} else {
return document.getElementById('user-info').getElementsByClassName('nav-tabs').length > 0 &&
document.getElementById('user-info').getElementsByClassName('tab-content').length > 0;
}
}
/**
* Debug logging.
* @param ja_log_msg
* @param ja_log_level
*/
function ja_log(ja_log_msg, ja_log_level) {
//##NO_FF_START##
//Firefox addons should not use console.(log|error|debug), so these lines
//are removed by the FF addon packaging script.
if(typeof ja_log_level === 'undefined') { ja_log_level = 1; }
if (ja_log_level <= junctionangle_debug) {
if (typeof ja_log_msg === "object") {
console.log(ja_log_msg);
}
else {
console.log("WME Junction Angle: " + ja_log_msg);
}
}
//##NO_FF_END##
}
function getByID(obj, id){
if (typeof(obj.getObjectById) == "function"){
return obj.getObjectById(id);
}else if (typeof(obj.getObjectById) == "undefined"){
return obj.get(id);
}
}
ja_bootstrap();
}
//Dynamically create, add and run the script in the real page context. We really do need access to many of the objects...
let run_ja_script = GM_addElement('script', {
textContent: "" + run_ja.toString() + " \n" + "run_ja();"
});
