☰

ControlD IP Flusher

Automatically flush IP addresses from ControlD Endpoint device logs in Legacy mode.

Як усталяваць

You will need to install an extension such as Tampermonkey, Greasemonkey or Violentmonkey to install this script.

You will need to install an extension such as Tampermonkey to install this script.

You will need to install an extension such as Tampermonkey or Violentmonkey to install this script.

You will need to install an extension such as Tampermonkey or Userscripts to install this script.

You will need to install an extension such as Tampermonkey to install this script.

You will need to install a user script manager extension to install this script.

(I already have a user script manager, let me install it!)

Як усталяваць

You will need to install an extension such as Stylus to install this style.

You will need to install an extension such as Stylus to install this style.

You will need to install an extension such as Stylus to install this style.

You will need to install a user style manager extension to install this style.

You will need to install a user style manager extension to install this style.

You will need to install a user style manager extension to install this style.

(I already have a user style manager, let me install it!)

Аўтар
0x11DFE
Усталяванняў за дзень
0
Усяго ўсталяванняў
10
Рэйтынг
0 0 0
Версія
05/12/24
Створаны
04.12.2024
Абноўлены
04.12.2024
Памер
3.0 КБ
Ліцэнзія
MIT
Ужываецца на

ControlD IP Flusher - Tampermonkey Script

Tired of manually clearing IP address logs in ControlD's Legacy DNS resolver mode? This Tampermonkey script automates the process for you!

What it does:

This script automatically flushes IP addresses from the Endpoint device logs in ControlD's Legacy DNS resolver mode. It helps maintain privacy and simplifies network troubleshooting by continuously monitoring and deleting new IP address entries.

Why it's useful:

  • Privacy: Reduces the amount of historical IP data stored.
  • Troubleshooting: Helps diagnose network issues by clearing logs.

How to use it:

  1. Install Tampermonkey extension for your browser.
  2. Go to Greasy Fork and install the "ControlD IP Flusher" script.
  3. Open ControlD and navigate to the "Endpoint Devices" tab.
  4. Click into the specific device's "IPs" section.
  5. The script will automatically start flushing IP addresses.

Important notes:

  • Requires ControlD's Legacy DNS resolver mode with "Auto Authorize IP" enabled.
  • Must be on the device's "IPs" page within "Endpoint Devices" for the script to work.

Disclaimer:

This script is provided as-is. Use it responsibly and at your own risk. The author (@T3SL4) is not responsible for any issues or damages caused by the use of this script.

Enjoy automated IP flushing with ControlD!